# translation of ru.po to Русский
# Linux kernel 2.6.12 Kconfig .pot file
# Licensed under GNU GPL v2
#
# The Linux Kernel Translation Project
# http://tlktp.sourceforge.net
#
# Translators:
# - Костаревым А. Ф. <kaf@linux.nevod.perm.su>
#   (http://www.nevod.ru/linux//doc/)
# - Ilya Petrov aka Muromec <ilya.muromec@gmail.com>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: ru\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2005-06-26 01:06+0100\n"
"PO-Revision-Date: 2005-01-19 19:28+0200\n"
"Last-Translator: Илья Петров <ilya.muromec@gmail.com>\n"
"Language-Team: Русский <ru@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Project-Id-Version kernel 2.6.12\n"
"X-Generator: KBabel 1.10\n"

#: net/sched/Kconfig:5
msgid "Packet scheduler clock source"
msgstr ""

#: net/sched/Kconfig:8
msgid ""
"Packet schedulers need a monotonic clock that increments at a static\n"
"rate. The kernel provides several suitable interfaces, each with\n"
"different properties:\n"
"\n"
"- high resolution (us or better)\n"
"- fast to read (minimal locking, no i/o access)\n"
"- synchronized on all processors\n"
"- handles cpu clock frequency changes\n"
"\n"
"but nothing provides all of the above.\n"
msgstr ""

#: net/sched/Kconfig:21
msgid "Timer interrupt"
msgstr ""

#: net/sched/Kconfig:22
msgid ""
"Say Y here if you want to use the timer interrupt (jiffies) as clock\n"
"source. This clock source is fast, synchronized on all processors and\n"
"handles cpu clock frequency changes, but its resolution is too low\n"
"for accurate shaping except at very low speed.\n"
msgstr ""

#: net/sched/Kconfig:29
msgid "gettimeofday"
msgstr ""

#: net/sched/Kconfig:30
msgid ""
"Say Y here if you want to use gettimeofday as clock source. This clock\n"
"source has high resolution, is synchronized on all processors and\n"
"handles cpu clock frequency changes, but it is slow.\n"
"\n"
"Choose this if you need a high resolution clock source but can't use\n"
"the CPU's cycle counter.\n"
msgstr ""

#: net/sched/Kconfig:39
msgid "CPU cycle counter"
msgstr ""

#: net/sched/Kconfig:41
msgid ""
"Say Y here if you want to use the CPU's cycle counter as clock source.\n"
"This is a cheap and high resolution clock source, but on some\n"
"architectures it is not synchronized on all processors and doesn't\n"
"handle cpu clock frequency changes.\n"
"\n"
"The useable cycle counters are:\n"
"\n"
"      x86/x86_64\t- Timestamp Counter\n"
"      alpha\t\t- Cycle Counter\n"
"      sparc64\t\t- %ticks register\n"
"      ppc64\t\t- Time base\n"
"      ia64\t\t- Interval Time Counter\n"
"\n"
"Choose this if your CPU's cycle counter is working properly.\n"
msgstr ""

#: net/sched/Kconfig:60
msgid "CBQ packet scheduler"
msgstr ""

#: net/sched/Kconfig:62
msgid ""
"Say Y here if you want to use the Class-Based Queueing (CBQ) packet\n"
"scheduling algorithm for some of your network devices.  This\n"
"algorithm classifies the waiting packets into a tree-like hierarchy\n"
"of classes; the leaves of this tree are in turn scheduled by\n"
"separate algorithms (called \"disciplines\" in this context).\n"
"\n"
"See the top of <file:net/sched/sch_cbq.c> for references about the\n"
"CBQ algorithm.\n"
"\n"
"CBQ is a commonly used scheduler, so if you're unsure, you should\n"
"say Y here. Then say Y to all the queueing algorithms below that you\n"
"want to use as CBQ disciplines.  Then say Y to \"Packet classifier\n"
"API\" and say Y to all the classifiers you want to use; a classifier\n"
"is a routine that allows you to sort your outgoing traffic into\n"
"classes based on a certain criterion.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_cbq.\n"
msgstr ""

#: net/sched/Kconfig:83
msgid "HTB packet scheduler"
msgstr ""

#: net/sched/Kconfig:85
msgid ""
"Say Y here if you want to use the Hierarchical Token Buckets (HTB)\n"
"packet scheduling algorithm for some of your network devices. See\n"
"<http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and\n"
"in-depth articles.\n"
"\n"
"HTB is very similar to the CBQ regarding its goals however is has\n"
"different properties and different algorithm.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_htb.\n"
msgstr ""

#: net/sched/Kconfig:98
msgid "HFSC packet scheduler"
msgstr ""

#: net/sched/Kconfig:100
msgid ""
"Say Y here if you want to use the Hierarchical Fair Service Curve\n"
"(HFSC) packet scheduling algorithm for some of your network devices.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_hfsc.\n"
msgstr ""

#: net/sched/Kconfig:107
msgid "  H-PFQ packet scheduler"
msgstr ""

#: net/sched/Kconfig:109
msgid "ATM pseudo-scheduler"
msgstr ""

#: net/sched/Kconfig:111
msgid ""
"Say Y here if you want to use the ATM pseudo-scheduler.  This\n"
"provides a framework for invoking classifiers (aka \"filters\"), which\n"
"in turn select classes of this queuing discipline.  Each class maps\n"
"the flow(s) it is handling to a given virtual circuit (see the top of\n"
"<file:net/sched/sch_atm.c>).\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_atm.\n"
msgstr ""

#: net/sched/Kconfig:122
msgid "The simplest PRIO pseudoscheduler"
msgstr ""

#: net/sched/Kconfig:124
msgid ""
"Say Y here if you want to use an n-band priority queue packet\n"
"\"scheduler\" for some of your network devices or as a leaf discipline\n"
"for the CBQ scheduling algorithm. If unsure, say Y.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_prio.\n"
msgstr ""

#: net/sched/Kconfig:133
msgid "RED queue"
msgstr ""

#: net/sched/Kconfig:135
msgid ""
"Say Y here if you want to use the Random Early Detection (RED)\n"
"packet scheduling algorithm for some of your network devices (see\n"
"the top of <file:net/sched/sch_red.c> for details and references\n"
"about the algorithm).\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_red.\n"
msgstr ""

#: net/sched/Kconfig:145
msgid "SFQ queue"
msgstr ""

#: net/sched/Kconfig:147
msgid ""
"Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)\n"
"packet scheduling algorithm for some of your network devices or as a\n"
"leaf discipline for the CBQ scheduling algorithm (see the top of\n"
"<file:net/sched/sch_sfq.c> for details and references about the SFQ\n"
"algorithm).\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_sfq.\n"
msgstr ""

#: net/sched/Kconfig:158
msgid "TEQL queue"
msgstr ""

#: net/sched/Kconfig:160
msgid ""
"Say Y here if you want to use the True Link Equalizer (TLE) packet\n"
"scheduling algorithm for some of your network devices or as a leaf\n"
"discipline for the CBQ scheduling algorithm. This queueing\n"
"discipline allows the combination of several physical devices into\n"
"one virtual device. (see the top of <file:net/sched/sch_teql.c> for\n"
"details).\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_teql.\n"
msgstr ""

#: net/sched/Kconfig:172
msgid "TBF queue"
msgstr ""

#: net/sched/Kconfig:174
msgid ""
"Say Y here if you want to use the Simple Token Bucket Filter (TBF)\n"
"packet scheduling algorithm for some of your network devices or as a\n"
"leaf discipline for the CBQ scheduling algorithm (see the top of\n"
"<file:net/sched/sch_tbf.c> for a description of the TBF algorithm).\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_tbf.\n"
msgstr ""

#: net/sched/Kconfig:184
msgid "GRED queue"
msgstr ""

#: net/sched/Kconfig:186
#, fuzzy
msgid ""
"Say Y here if you want to use the Generic Random Early Detection\n"
"(GRED) packet scheduling algorithm for some of your network devices\n"
"(see the top of <file:net/sched/sch_red.c> for details and\n"
"references about the algorithm).\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_gred.\n"
msgstr ""
"Драйвер для всех SCSI host адаптеров, выпускаемых фирмой AdvanSys.\n"
"Документацию Вы можете найти в файле drivers/scsi/advansys.c.\n"
"Этот драйвер может быть модульным (код, который может быть\n"
"по вашему желанию добавлен к уже работающему ядру или удален).\n"
"Если Вы собираетесь использовать драйвер в модульном режиме\n"
"ответьте M и почитайте документацию по модульным драйверам в \n"
"файле Documentation/modules.txt.\n"

#: net/sched/Kconfig:196
msgid "Diffserv field marker"
msgstr ""

#: net/sched/Kconfig:198
msgid ""
"Say Y if you want to schedule packets according to the\n"
"Differentiated Services architecture proposed in RFC 2475.\n"
"Technical information on this method, with pointers to associated\n"
"RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_dsmark.\n"
msgstr ""

#: net/sched/Kconfig:208
msgid "Network emulator"
msgstr ""

#: net/sched/Kconfig:210
msgid ""
"Say Y if you want to emulate network delay, loss, and packet\n"
"re-ordering. This is often useful to simulate networks when\n"
"testing applications or protocols.\n"
"\n"
"To compile this driver as a module, choose M here: the module\n"
"will be called sch_netem.\n"
"\n"
"If unsure, say N.\n"
msgstr ""

#: net/sched/Kconfig:221
msgid "Ingress Qdisc"
msgstr ""

#: net/sched/Kconfig:223
msgid ""
"If you say Y here, you will be able to police incoming bandwidth\n"
"and drop packets when this bandwidth exceeds your desired rate.\n"
"If unsure, say Y.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called sch_ingress.\n"
msgstr ""

#: net/sched/Kconfig:232
msgid "QoS support"
msgstr ""

#: net/sched/Kconfig:234
msgid ""
"Say Y here if you want to include Quality Of Service scheduling\n"
"features, which means that you will be able to request certain\n"
"rate-of-flow limits for your network devices.\n"
"\n"
"This Quality of Service (QoS) support will enable you to use\n"
"Differentiated Services (diffserv) and Resource Reservation Protocol\n"
"(RSVP) on your Linux router if you also say Y to \"Packet classifier\n"
"API\" and to some classifiers below. Documentation and software is at\n"
"<http://diffserv.sourceforge.net/>.\n"
"\n"
"Note that the answer to this question won't directly affect the\n"
"kernel: saying N will just cause the configurator to skip all\n"
"the questions about QoS support.\n"
msgstr ""

#: net/sched/Kconfig:250
msgid "Rate estimator"
msgstr ""

#: net/sched/Kconfig:252
msgid ""
"In order for Quality of Service scheduling to work, the current\n"
"rate-of-flow for a network device has to be estimated; if you say Y\n"
"here, the kernel will do just that.\n"
msgstr ""

#: net/sched/Kconfig:258
msgid "Packet classifier API"
msgstr ""

#: net/sched/Kconfig:260
msgid ""
"The CBQ scheduling algorithm requires that network packets which are\n"
"scheduled to be sent out over a network device be classified\n"
"according to some criterion. If you say Y here, you will get a\n"
"choice of several different packet classifiers with the following\n"
"questions.\n"
"\n"
"This will enable you to use Differentiated Services (diffserv) and\n"
"Resource Reservation Protocol (RSVP) on your Linux router.\n"
"Documentation and software is at\n"
"<http://diffserv.sourceforge.net/>.\n"
msgstr ""

#: net/sched/Kconfig:273
msgid "Basic classifier"
msgstr ""

#: net/sched/Kconfig:275
#, fuzzy
msgid ""
"Say Y here if you want to be able to classify packets using\n"
"only extended matches and actions.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_basic.\n"
msgstr ""
"Драйвер для всех SCSI host адаптеров, выпускаемых фирмой AdvanSys.\n"
"Документацию Вы можете найти в файле drivers/scsi/advansys.c.\n"
"Этот драйвер может быть модульным (код, который может быть\n"
"по вашему желанию добавлен к уже работающему ядру или удален).\n"
"Если Вы собираетесь использовать драйвер в модульном режиме\n"
"ответьте M и почитайте документацию по модульным драйверам в \n"
"файле Documentation/modules.txt.\n"

#: net/sched/Kconfig:283
msgid "TC index classifier"
msgstr ""

#: net/sched/Kconfig:285
msgid ""
"If you say Y here, you will be able to classify outgoing packets\n"
"according to the tc_index field of the skb. You will want this\n"
"feature if you want to implement Differentiated Services using\n"
"sch_dsmark. If unsure, say Y.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_tcindex.\n"
msgstr ""

#: net/sched/Kconfig:295
msgid "Routing table based classifier"
msgstr ""

#: net/sched/Kconfig:298
msgid ""
"If you say Y here, you will be able to classify outgoing packets\n"
"according to the route table entry they matched. If unsure, say Y.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_route.\n"
msgstr ""

#: net/sched/Kconfig:310
msgid "Firewall based classifier"
msgstr ""

#: net/sched/Kconfig:312
msgid ""
"If you say Y here, you will be able to classify outgoing packets\n"
"according to firewall criteria you specified.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_fw.\n"
msgstr ""

#: net/sched/Kconfig:320
msgid "U32 classifier"
msgstr ""

#: net/sched/Kconfig:322
msgid ""
"If you say Y here, you will be able to classify outgoing packets\n"
"according to their destination address. If unsure, say Y.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_u32.\n"
msgstr ""

#: net/sched/Kconfig:330
msgid "U32 classifier performance counters"
msgstr ""

#: net/sched/Kconfig:332
msgid ""
"gathers stats that could be used to tune u32 classifier performance.\n"
"Requires a new iproute2\n"
"You MUST NOT turn this on if you dont have an update iproute2.\n"
msgstr ""

#: net/sched/Kconfig:338
msgid "classify input device (slows things u32/fw) "
msgstr ""

#: net/sched/Kconfig:340
msgid ""
"This option will be killed eventually when a\n"
"metadata action appears because it slows things a little\n"
"Available only for u32 and fw classifiers.\n"
"Requires a new iproute2\n"
"You MUST NOT turn this on if you dont have an update iproute2.\n"
msgstr ""

#: net/sched/Kconfig:348
msgid "Use nfmark as a key in U32 classifier"
msgstr ""

#: net/sched/Kconfig:350
msgid ""
"This allows you to match mark in a u32 filter.\n"
"Example:\n"
"tc filter add dev eth0 protocol ip parent 1:0 prio 5 u32 \\n      match mark "
"0x0090 0xffff \\n      match ip dst 4.4.4.4 \\n      flowid 1:90\n"
"You must use a new iproute2 to use this feature.\n"
msgstr ""

#: net/sched/Kconfig:360
msgid "Special RSVP classifier"
msgstr ""

#: net/sched/Kconfig:362
msgid ""
"The Resource Reservation Protocol (RSVP) permits end systems to\n"
"request a minimum and maximum data flow rate for a connection; this\n"
"is important for real time data such as streaming sound or video.\n"
"\n"
"Say Y here if you want to be able to classify outgoing packets based\n"
"on their RSVP requests.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_rsvp.\n"
msgstr ""

#: net/sched/Kconfig:374
msgid "Special RSVP classifier for IPv6"
msgstr ""

#: net/sched/Kconfig:376
msgid ""
"The Resource Reservation Protocol (RSVP) permits end systems to\n"
"request a minimum and maximum data flow rate for a connection; this\n"
"is important for real time data such as streaming sound or video.\n"
"\n"
"Say Y here if you want to be able to classify outgoing packets based\n"
"on their RSVP requests and you are using the new Internet Protocol\n"
"IPv6 as opposed to the older and more common IPv4.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called cls_rsvp6.\n"
msgstr ""

#: net/sched/Kconfig:389
#, fuzzy
msgid "Extended Matches"
msgstr "Расширенные аттрибуты Ext2"

#: net/sched/Kconfig:391
msgid ""
"Say Y here if you want to use extended matches on top of classifiers\n"
"and select the extended matches below.\n"
"\n"
"Extended matches are small classification helpers not worth writing\n"
"a separate classifier.\n"
"\n"
"You must have a recent version of the iproute2 tools in order to use\n"
"extended matches.\n"
msgstr ""

#: net/sched/Kconfig:402
msgid "Stack size"
msgstr ""

#: net/sched/Kconfig:405
msgid ""
"Size of the local stack variable used while evaluating the tree of\n"
"ematches. Limits the depth of the tree, i.e. the number of\n"
"encapsulated precedences. Every level requires 4 bytes of additional\n"
"stack space.\n"
msgstr ""

#: net/sched/Kconfig:412
msgid "Simple packet data comparison"
msgstr ""

#: net/sched/Kconfig:414
#, fuzzy
msgid ""
"Say Y here if you want to be able to classify packets based on\n"
"simple packet data comparisons for 8, 16, and 32bit values.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called em_cmp.\n"
msgstr ""
"Драйвер для всех SCSI host адаптеров, выпускаемых фирмой AdvanSys.\n"
"Документацию Вы можете найти в файле drivers/scsi/advansys.c.\n"
"Этот драйвер может быть модульным (код, который может быть\n"
"по вашему желанию добавлен к уже работающему ядру или удален).\n"
"Если Вы собираетесь использовать драйвер в модульном режиме\n"
"ответьте M и почитайте документацию по модульным драйверам в \n"
"файле Documentation/modules.txt.\n"

#: net/sched/Kconfig:422
msgid "Multi byte comparison"
msgstr ""

#: net/sched/Kconfig:424
#, fuzzy
msgid ""
"Say Y here if you want to be able to classify packets based on\n"
"multiple byte comparisons mainly useful for IPv6 address comparisons.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called em_nbyte.\n"
msgstr ""
"Драйвер для всех SCSI host адаптеров, выпускаемых фирмой AdvanSys.\n"
"Документацию Вы можете найти в файле drivers/scsi/advansys.c.\n"
"Этот драйвер может быть модульным (код, который может быть\n"
"по вашему желанию добавлен к уже работающему ядру или удален).\n"
"Если Вы собираетесь использовать драйвер в модульном режиме\n"
"ответьте M и почитайте документацию по модульным драйверам в \n"
"файле Documentation/modules.txt.\n"

#: net/sched/Kconfig:432
msgid "U32 hashing key"
msgstr ""

#: net/sched/Kconfig:434
#, fuzzy
msgid ""
"Say Y here if you want to be able to classify packets using\n"
"the famous u32 key in combination with logic relations.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called em_u32.\n"
msgstr ""
"Драйвер для всех SCSI host адаптеров, выпускаемых фирмой AdvanSys.\n"
"Документацию Вы можете найти в файле drivers/scsi/advansys.c.\n"
"Этот драйвер может быть модульным (код, который может быть\n"
"по вашему желанию добавлен к уже работающему ядру или удален).\n"
"Если Вы собираетесь использовать драйвер в модульном режиме\n"
"ответьте M и почитайте документацию по модульным драйверам в \n"
"файле Documentation/modules.txt.\n"

#: net/sched/Kconfig:442
msgid "Metadata"
msgstr ""

#: net/sched/Kconfig:444
#, fuzzy
msgid ""
"Say Y here if you want to be ablt to classify packets based on\n"
"metadata such as load average, netfilter attributes, socket\n"
"attributes and routing decisions.\n"
"\n"
"To compile this code as a module, choose M here: the\n"
"module will be called em_meta.\n"
msgstr ""
"Драйвер для всех SCSI host адаптеров, выпускаемых фирмой AdvanSys.\n"
"Документацию Вы можете найти в файле drivers/scsi/advansys.c.\n"
"Этот драйвер может быть модульным (код, который может быть\n"
"по вашему желанию добавлен к уже работающему ядру или удален).\n"
"Если Вы собираетесь использовать драйвер в модульном режиме\n"
"ответьте M и почитайте документацию по модульным драйверам в \n"
"файле Documentation/modules.txt.\n"

#: net/sched/Kconfig:453
msgid "Packet ACTION"
msgstr ""

#: net/sched/Kconfig:455
msgid ""
"This option requires you have a new iproute2. It enables\n"
"tc extensions which can be used with tc classifiers.\n"
"  You MUST NOT turn this on if you dont have an update iproute2.\n"
msgstr ""

#: net/sched/Kconfig:461
msgid "Policing Actions"
msgstr ""

#: net/sched/Kconfig:463
msgid ""
"If you are using a newer iproute2 select this one, otherwise use one\n"
"below to select a policer.\n"
"  You MUST NOT turn this on if you dont have an update iproute2.\n"
msgstr ""

#: net/sched/Kconfig:469
msgid "generic Actions"
msgstr ""

#: net/sched/Kconfig:471
msgid ""
"You must have new iproute2 to use this feature.\n"
"This adds simple filtering actions like drop, accept etc.\n"
msgstr ""

#: net/sched/Kconfig:476
msgid "generic Actions probability"
msgstr ""

#: net/sched/Kconfig:478
msgid "Allows generic actions to be randomly or deterministically used.\n"
msgstr ""

#: net/sched/Kconfig:482
msgid "Packet In/Egress redirecton/mirror Actions"
msgstr ""

#: net/sched/Kconfig:484
msgid ""
"requires new iproute2\n"
"This allows packets to be mirrored or redirected to netdevices\n"
msgstr ""

#: net/sched/Kconfig:489
msgid "iptables Actions"
msgstr ""

#: net/sched/Kconfig:491
msgid ""
"requires new iproute2\n"
"This allows iptables targets to be used by tc filters\n"
msgstr ""

#: net/sched/Kconfig:496
msgid "Generic Packet Editor Actions"
msgstr ""

#: net/sched/Kconfig:498
msgid ""
"requires new iproute2\n"
"This allows for packets to be generically edited\n"
msgstr ""

#: net/sched/Kconfig:503
msgid "Traffic policing (needed for in/egress)"
msgstr ""

#: net/sched/Kconfig:505
msgid ""
"Say Y to support traffic policing (bandwidth limits).  Needed for\n"
"ingress and egress rate limiting.\n"
msgstr ""

#: net/sched/Kconfig:510
msgid "Simple action"
msgstr ""

#: net/sched/Kconfig:512
msgid ""
"You must have new iproute2 to use this feature.\n"
"This adds a very simple action for demonstration purposes\n"
"The idea is to give action authors a basic example to look at.\n"
"All this action will do is print on the console the configured\n"
"policy string followed by _ then packet count.\n"
"\n"
msgstr ""