# Linux kernel 2.6.12 Kconfig .pot file # Licensed under GNU GPL v2 # # The Linux Kernel Translation Project # http://tlktp.sourceforge.net # # Translators: # msgid "" msgstr "" "Project-Id-Version: Linux 2.6.12\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-06-26 01:06+0100\n" "PO-Revision-Date: 2003-03-10 20:16+0200\n" "Last-Translator: Dominik Mierzejewski\n" "Language-Team: Polish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: sound/oss/Kconfig:8 msgid "BT878 audio dma" msgstr "" #: sound/oss/Kconfig:10 msgid "" "Audio DMA support for bt878 based grabber boards. As you might have\n" "already noticed, bt878 is listed with two functions in /proc/pci.\n" "Function 0 does the video stuff (bt848 compatible), function 1 does\n" "the same for audio data. This is a driver for the audio part of\n" "the chip. If you say 'Y' here you get a oss-compatible dsp device\n" "where you can record from. If you want just watch TV you probably\n" "don't need this driver as most TV cards handle sound with a short\n" "cable from the TV card to your sound card's line-in.\n" "\n" "To compile this driver as a module, choose M here: the module will\n" "be called btaudio.\n" msgstr "" #: sound/oss/Kconfig:24 msgid "C-Media PCI (CMI8338/8738)" msgstr "" #: sound/oss/Kconfig:26 #, fuzzy msgid "" "Say Y or M if you have a PCI sound card using the CMI8338\n" "or the CMI8738 chipset. Data on these chips are available at\n" ".\n" "\n" "A userspace utility to control some internal registers of these\n" "chips is available at\n" ".\n" msgstr "" "Enable loopback from SPDIF in to SPDIF out. For discussion, see\n" "\"The 8738 Audio SPDIF In/Out Technical Data\" on the technical\n" "support page at .\n" "\n" "A userspace utility to control even more internal registers of these\n" "chips is available at\n" ".\n" "This package will among other things help you enable SPDIF\n" "out/in/loop/monitor.\n" "\n" #: sound/oss/Kconfig:36 msgid "Enable legacy FM" msgstr "" #: sound/oss/Kconfig:38 msgid "" "Say Y here to enable the legacy FM (frequency-modulation) synthesizer\n" "support on a card using the CMI8338 or CMI8378 chipset. Even it is\n" "enabled, you need to set fmio as proper value to enable it.\n" "Say N here if you don't need this.\n" msgstr "" #: sound/oss/Kconfig:45 msgid "Enable legacy MPU-401" msgstr "" #: sound/oss/Kconfig:47 msgid "" "Say Y here to enable the legacy MPU401 MIDI synthesizer support on a\n" "card using the CMI8338 or CMI8378 chipset. Even it is enabled,\n" "you need to set mpuio as proper value to enable it.\n" "Say N here if you don't need this.\n" msgstr "" #: sound/oss/Kconfig:54 msgid "Enable joystick" msgstr "" #: sound/oss/Kconfig:56 msgid "" "Say Y here in order to enable the joystick port on a sound card using\n" "the CMI8338 or the CMI8738 chipset. You need to config the\n" "gameport support and set joystick parameter as 1 to use it.\n" "Say N here if you don't need this.\n" msgstr "" #: sound/oss/Kconfig:63 #, fuzzy msgid "Creative SBLive! (EMU10K1)" msgstr "Creative EMU10K1 based PCI sound cards" #: sound/oss/Kconfig:65 #, fuzzy msgid "" "Say Y or M if you have a PCI sound card using the EMU10K1 chipset,\n" "such as the Creative SBLive!, SB PCI512 or Emu-APS.\n" "\n" "For more information on this driver and the degree of support for\n" "the different card models please check:\n" "\n" " \n" "\n" "It is now possible to load dsp microcode patches into the EMU10K1\n" "chip. These patches are used to implement real time sound\n" "processing effects which include for example: signal routing,\n" "bass/treble control, AC3 passthrough, ...\n" "Userspace tools to create new patches and load/unload them can be\n" "found in the emu-tools package at the above URL.\n" msgstr "" "Say Y if you want to be able to use the OSS /dev/sequencer\n" "interface. This code is still experimental.\n" "\n" #: sound/oss/Kconfig:82 msgid "Creative SBLive! MIDI (EXPERIMENTAL)" msgstr "" #: sound/oss/Kconfig:84 msgid "" "Say Y if you want to be able to use the OSS /dev/sequencer\n" "interface. This code is still experimental.\n" msgstr "" #: sound/oss/Kconfig:89 msgid "Crystal SoundFusion (CS4280/461x)" msgstr "" #: sound/oss/Kconfig:91 msgid "" "This module drives the Crystal SoundFusion devices (CS4280/46xx\n" "series) when wired as native sound drivers with AC97 codecs. If\n" "this driver does not work try the CS4232 driver.\n" msgstr "" #: sound/oss/Kconfig:97 msgid "Crystal Sound CS4281" msgstr "" #: sound/oss/Kconfig:99 msgid "" "Picture and feature list at\n" ".\n" msgstr "" #: sound/oss/Kconfig:104 msgid "Crystal Sound CS4297a (for Swarm)" msgstr "" #: sound/oss/Kconfig:106 msgid "" "The BCM91250A has a Crystal CS4297a on synchronous serial\n" "port B (in addition to the DB-9 serial port). Say Y or M\n" "here to enable the sound chip instead of the UART. Also\n" "note that CONFIG_KGDB should not be enabled at the same\n" "time, since it also attempts to use this UART port.\n" msgstr "" #: sound/oss/Kconfig:114 msgid "Ensoniq AudioPCI (ES1370)" msgstr "" #: sound/oss/Kconfig:116 msgid "" "Say Y or M if you have a PCI sound card utilizing the Ensoniq\n" "ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find\n" "out if your sound card uses an ES1370 without removing your\n" "computer's cover, use lspci -n and look for the PCI ID\n" "1274:5000. Since Ensoniq was bought by Creative Labs,\n" "Sound Blaster 64/PCI models are either ES1370 or ES1371 based.\n" "This driver differs slightly from OSS/Free, so PLEASE READ\n" ".\n" msgstr "" #: sound/oss/Kconfig:127 msgid "Creative Ensoniq AudioPCI 97 (ES1371)" msgstr "" #: sound/oss/Kconfig:129 msgid "" "Say Y or M if you have a PCI sound card utilizing the Ensoniq\n" "ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if\n" "your sound card uses an ES1371 without removing your computer's\n" "cover, use lspci -n and look for the PCI ID 1274:1371. Since\n" "Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI\n" "models are either ES1370 or ES1371 based. This driver differs\n" "slightly from OSS/Free, so PLEASE READ\n" ".\n" msgstr "" #: sound/oss/Kconfig:140 msgid "ESS Technology Solo1" msgstr "" #: sound/oss/Kconfig:142 msgid "" "Say Y or M if you have a PCI sound card utilizing the ESS Technology\n" "Solo1 chip. To find out if your sound card uses a\n" "Solo1 chip without removing your computer's cover, use\n" "lspci -n and look for the PCI ID 125D:1969. This driver\n" "differs slightly from OSS/Free, so PLEASE READ\n" ".\n" msgstr "" #: sound/oss/Kconfig:151 msgid "ESS Maestro, Maestro2, Maestro2E driver" msgstr "" #: sound/oss/Kconfig:153 msgid "" "Say Y or M if you have a sound system driven by ESS's Maestro line\n" "of PCI sound chips. These include the Maestro 1, Maestro 2, and\n" "Maestro 2E. See for more\n" "details.\n" msgstr "" #: sound/oss/Kconfig:160 msgid "ESS Maestro3/Allegro driver (EXPERIMENTAL)" msgstr "" #: sound/oss/Kconfig:162 msgid "" "Say Y or M if you have a sound system driven by ESS's Maestro 3\n" "PCI sound chip.\n" msgstr "" #: sound/oss/Kconfig:167 msgid "Intel ICH (i8xx) audio support" msgstr "" #: sound/oss/Kconfig:169 msgid "" "Support for integral audio in Intel's I/O Controller Hub (ICH)\n" "chipset, as used on the 810/820/840 motherboards.\n" msgstr "" #: sound/oss/Kconfig:174 msgid "PA Harmony audio driver" msgstr "" #: sound/oss/Kconfig:176 msgid "" "Say 'Y' or 'M' to include support for Harmony soundchip\n" "on HP 712, 715/new and many other GSC based machines.\n" msgstr "" # sound/oss/Kconfig:181 sound/pci/Kconfig:472 #: sound/oss/Kconfig:181 msgid "S3 SonicVibes" msgstr "" #: sound/oss/Kconfig:183 msgid "" "Say Y or M if you have a PCI sound card utilizing the S3\n" "SonicVibes chipset. To find out if your sound card uses a\n" "SonicVibes chip without removing your computer's cover, use\n" "lspci -n and look for the PCI ID 5333:CA00. This driver\n" "differs slightly from OSS/Free, so PLEASE READ\n" ".\n" msgstr "" #: sound/oss/Kconfig:192 msgid "SGI Visual Workstation Sound" msgstr "" #: sound/oss/Kconfig:194 msgid "" "Say Y or M if you have an SGI Visual Workstation and you want to be\n" "able to use its on-board audio. Read\n" " for more info on this driver's\n" "capabilities.\n" msgstr "" #: sound/oss/Kconfig:201 #, fuzzy msgid "SGI HAL2 sound (EXPERIMENTAL)" msgstr "PROMISE DC4030 support" #: sound/oss/Kconfig:203 msgid "" "Say Y or M if you have an SGI Indy system and want to be able to\n" "use it's on-board A2 audio system.\n" msgstr "" #: sound/oss/Kconfig:208 msgid "IT8172G Sound" msgstr "" #: sound/oss/Kconfig:212 msgid "NEC Vrc5477 AC97 sound" msgstr "" #: sound/oss/Kconfig:214 msgid "" "Say Y here to enable sound support for the NEC Vrc5477 chip, an\n" "integrated, multi-function controller chip for MIPS CPUs. Works\n" "with the AC97 codec.\n" msgstr "" #: sound/oss/Kconfig:220 msgid "Au1000 Sound" msgstr "" #: sound/oss/Kconfig:224 msgid "Au1550 AC97 Sound" msgstr "" #: sound/oss/Kconfig:228 msgid "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" msgstr "" #: sound/oss/Kconfig:230 msgid "" "Say Y or M if you have a PCI sound card utilizing the Trident\n" "4DWave-DX/NX chipset or your mother board chipset has SiS 7018\n" "or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded\n" "in SiS960 Super South Bridge and SiS540/630 Single Chipset.\n" "The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,\n" "M1535+ or M1535D+ South Bridge.\n" "\n" "Use lspci -n to find out if your sound card or chipset uses\n" "Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands\n" "for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID\n" "10B9:5451 stands for ALi5451.\n" "\n" "This driver supports S/PDIF in/out (record/playback) for ALi 5451\n" "embedded in ALi M1535+ and M1535D+. Note that they aren't all\n" "enabled by default; you can enable them by saying Y to \"/proc file\n" "system support\" and \"Sysctl support\", and after the /proc file\n" "system has been mounted, executing the command\n" "\n" " command\t\t\twhat is enabled\n" "\n" "echo 0>/proc/ALi5451\tpcm out is also set to S/PDIF out. (Default).\n" "\n" "echo 1>/proc/ALi5451\tuse S/PDIF out to output pcm data.\n" "\n" "echo 2>/proc/ALi5451\tuse S/PDIF out to output non-pcm data.\n" "(AC3...).\n" "\n" "echo 3>/proc/ALi5451\trecord from Ac97 in(MIC, Line in...).\n" "(Default).\n" "\n" "echo 4>/proc/ALi5451\tno matter Ac97 settings, record from S/PDIF\n" "in.\n" "\n" "\n" "This driver differs slightly from OSS/Free, so PLEASE READ the\n" "comments at the top of .\n" msgstr "" #: sound/oss/Kconfig:269 msgid "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" msgstr "" #: sound/oss/Kconfig:271 msgid "" "Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or\n" "Monterey (not for the Pinnacle or Fiji).\n" "\n" "See for important information\n" "about this driver. Note that it has been discontinued, but the\n" "Voyetra Turtle Beach knowledge base entry for it is still available\n" "at .\n" msgstr "" #: sound/oss/Kconfig:280 msgid "Compiled-in MSND Classic support requires firmware during compilation." msgstr "" #: sound/oss/Kconfig:289 msgid "Full pathname of MSNDINIT.BIN firmware file" msgstr "" # sound/oss/Kconfig:292 sound/oss/Kconfig:303 sound/oss/Kconfig:365 #: sound/oss/Kconfig:292 sound/oss/Kconfig:303 sound/oss/Kconfig:365 msgid "" "The MultiSound cards have two firmware files which are required for\n" "operation, and are not currently included. These files can be\n" "obtained from Turtle Beach. See\n" " for information on how to\n" "obtain this.\n" msgstr "" #: sound/oss/Kconfig:300 msgid "Full pathname of MSNDPERM.BIN firmware file" msgstr "" #: sound/oss/Kconfig:311 msgid "MSND Classic IRQ 5, 7, 9, 10, 11, 12" msgstr "" #: sound/oss/Kconfig:314 msgid "Interrupt Request line for the MultiSound Classic and related cards.\n" msgstr "" #: sound/oss/Kconfig:318 msgid "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000" msgstr "" #: sound/oss/Kconfig:321 msgid "" "Memory-mapped I/O base address for the MultiSound Classic and\n" "related cards.\n" msgstr "" #: sound/oss/Kconfig:326 msgid "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0" msgstr "" #: sound/oss/Kconfig:329 msgid "I/O port address for the MultiSound Classic and related cards.\n" msgstr "" #: sound/oss/Kconfig:333 msgid "Support for Turtle Beach MultiSound Pinnacle, Fiji" msgstr "" #: sound/oss/Kconfig:335 msgid "" "Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.\n" "See for important information\n" "about this driver. Note that it has been discontinued, but the\n" "Voyetra Turtle Beach knowledge base entry for it is still available\n" "at .\n" msgstr "" #: sound/oss/Kconfig:342 msgid "Compiled-in MSND Pinnacle support requires firmware during compilation." msgstr "" #: sound/oss/Kconfig:351 msgid "Full pathname of PNDSPINI.BIN firmware file" msgstr "" #: sound/oss/Kconfig:354 msgid "" "The MultiSound cards have two firmware files which are required\n" "for operation, and are not currently included. These files can be\n" "obtained from Turtle Beach. See\n" " for information on how to\n" "obtain this.\n" msgstr "" #: sound/oss/Kconfig:362 msgid "Full pathname of PNDSPERM.BIN firmware file" msgstr "" #: sound/oss/Kconfig:373 msgid "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12" msgstr "" #: sound/oss/Kconfig:376 msgid "" "Interrupt request line for the primary synthesizer on MultiSound\n" "Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:381 msgid "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000" msgstr "" # sound/oss/Kconfig:384 sound/oss/Kconfig:392 #: sound/oss/Kconfig:384 sound/oss/Kconfig:392 msgid "" "Memory-mapped I/O base address for the primary synthesizer on\n" "MultiSound Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:389 msgid "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0" msgstr "" #: sound/oss/Kconfig:397 msgid "MSND Pinnacle has S/PDIF I/O" msgstr "" #: sound/oss/Kconfig:399 msgid "" "If you have the S/PDIF daughter board for the Pinnacle or Fiji,\n" "answer Y here; otherwise, say N. If you have this, you will be able\n" "to play and record from the S/PDIF port (digital signal). See\n" " for information on how to make\n" "use of this capability.\n" msgstr "" #: sound/oss/Kconfig:407 msgid "MSND Pinnacle non-PnP Mode" msgstr "" #: sound/oss/Kconfig:409 msgid "" "The Pinnacle and Fiji card resources can be configured either with\n" "PnP, or through a configuration port. Say Y here if your card is NOT\n" "in PnP mode. For the Pinnacle, configuration in non-PnP mode allows\n" "use of the IDE and joystick peripherals on the card as well; these\n" "do not show up when the card is in PnP mode. Specifying zero for any\n" "resource of a device will disable the device. If you are running the\n" "card in PnP mode, you must say N here and use isapnptools to\n" "configure the card's resources.\n" msgstr "" #: sound/oss/Kconfig:419 msgid "MSND Pinnacle DSP section will be configured to above parameters." msgstr "" #: sound/oss/Kconfig:423 msgid "MSND Pinnacle config port 250,260,270" msgstr "" #: sound/oss/Kconfig:426 msgid "" "This is the port which the Pinnacle and Fiji uses to configure the\n" "card's resources when not in PnP mode. If your card is in PnP mode,\n" "then be sure to say N to the previous option, \"MSND Pinnacle Non-PnP\n" "Mode\".\n" msgstr "" #: sound/oss/Kconfig:432 msgid "Pinnacle-specific Device Configuration (0 disables)" msgstr "" #: sound/oss/Kconfig:436 msgid "MSND Pinnacle MPU I/O (e.g. 330)" msgstr "" #: sound/oss/Kconfig:439 msgid "" "Memory-mapped I/O base address for the Kurzweil daughterboard\n" "synthesizer on MultiSound Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:444 msgid "MSND Pinnacle MPU IRQ (e.g. 9)" msgstr "" #: sound/oss/Kconfig:447 msgid "" "Interrupt request number for the Kurzweil daughterboard\n" "synthesizer on MultiSound Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:452 msgid "MSND Pinnacle IDE I/O 0 (e.g. 170)" msgstr "" #: sound/oss/Kconfig:455 msgid "" "CD-ROM drive 0 memory-mapped I/O base address for the MultiSound\n" "Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:460 msgid "MSND Pinnacle IDE I/O 1 (e.g. 376)" msgstr "" #: sound/oss/Kconfig:463 msgid "" "CD-ROM drive 1 memory-mapped I/O base address for the MultiSound\n" "Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:468 msgid "MSND Pinnacle IDE IRQ (e.g. 15)" msgstr "" #: sound/oss/Kconfig:471 msgid "" "Interrupt request number for the IDE CD-ROM interface on the\n" "MultiSound Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:476 msgid "MSND Pinnacle joystick I/O (e.g. 200)" msgstr "" #: sound/oss/Kconfig:479 msgid "" "Memory-mapped I/O base address for the joystick port on MultiSound\n" "Pinnacle and Fiji sound cards.\n" msgstr "" #: sound/oss/Kconfig:484 msgid "MSND buffer size (kB)" msgstr "" #: sound/oss/Kconfig:487 msgid "" "Configures the size of each audio buffer, in kilobytes, for\n" "recording and playing in the MultiSound drivers (both the Classic\n" "and Pinnacle). Larger values reduce the chance of data overruns at\n" "the expense of overall latency. If unsure, use the default.\n" msgstr "" #: sound/oss/Kconfig:494 msgid "VIA 82C686 Audio Codec" msgstr "" #: sound/oss/Kconfig:496 msgid "" "Say Y here to include support for the audio codec found on VIA\n" "82Cxxx-based chips. Typically these are built into a motherboard.\n" "\n" "DO NOT select Sound Blaster or Adlib with this driver, unless\n" "you have a Sound Blaster or Adlib card in addition to your VIA\n" "audio chip.\n" msgstr "" #: sound/oss/Kconfig:505 msgid "VIA 82C686 MIDI" msgstr "" #: sound/oss/Kconfig:507 msgid "" "Answer Y to use the MIDI interface of the Via686. You may need to\n" "enable this in the BIOS before it will work. This is for connection\n" "to external MIDI hardware, and is not required for software playback\n" "of MIDI files.\n" msgstr "" #: sound/oss/Kconfig:514 msgid "OSS sound modules" msgstr "" #: sound/oss/Kconfig:516 msgid "" "OSS is the Open Sound System suite of sound card drivers. They make\n" "sound programming easier since they provide a common API. Say Y or\n" "M here (the module will be called sound) if you haven't found a\n" "driver for your sound card above, then pick your driver from the\n" "list below.\n" msgstr "" #: sound/oss/Kconfig:524 msgid "Verbose initialisation" msgstr "" #: sound/oss/Kconfig:526 msgid "" "Verbose soundcard initialization -- affects the format of autoprobe\n" "and initialization messages at boot time.\n" msgstr "" #: sound/oss/Kconfig:531 msgid "Persistent DMA buffers" msgstr "" #: sound/oss/Kconfig:533 msgid "" "Linux can often have problems allocating DMA buffers for ISA sound\n" "cards on machines with more than 16MB of RAM. This is because ISA\n" "DMA buffers must exist below the 16MB boundary and it is quite\n" "possible that a large enough free block in this region cannot be\n" "found after the machine has been running for a while. If you say Y\n" "here the DMA buffers (64Kb) will be allocated at boot time and kept\n" "until the shutdown. This option is only useful if you said Y to\n" "\"OSS sound modules\", above. If you said M to \"OSS sound modules\"\n" "then you can get the persistent DMA buffer functionality by passing\n" "the command-line argument \"dmabuf=1\" to the sound module.\n" "\n" "Say Y unless you have 16MB or more RAM or a PCI sound card.\n" msgstr "" #: sound/oss/Kconfig:548 msgid "AD1816(A) based cards (EXPERIMENTAL)" msgstr "" #: sound/oss/Kconfig:550 msgid "" "Say M here if you have a sound card based on the Analog Devices\n" "AD1816(A) chip.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"ad1816=,,,\" to the kernel command line.\n" msgstr "" #: sound/oss/Kconfig:558 msgid "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)" msgstr "" #: sound/oss/Kconfig:560 msgid "" "Say M here if you have a sound card based on the Analog Devices\n" "AD1889 chip.\n" msgstr "" #: sound/oss/Kconfig:565 msgid "Aztech Sound Galaxy (non-PnP) cards" msgstr "" #: sound/oss/Kconfig:567 msgid "" "This module initializes the older non Plug and Play sound galaxy\n" "cards from Aztech. It supports the Waverider Pro 32 - 3D and the\n" "Galaxy Washington 16.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"sgalaxy=,,,,\" to the kernel command\n" "line.\n" msgstr "" #: sound/oss/Kconfig:577 msgid "Adlib Cards" msgstr "" #: sound/oss/Kconfig:579 msgid "" "Includes ASB 64 4D. Information on programming AdLib cards is\n" "available at .\n" msgstr "" #: sound/oss/Kconfig:584 msgid "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)" msgstr "" #: sound/oss/Kconfig:586 msgid "" "ACI (Audio Command Interface) is a protocol used to communicate with\n" "the microcontroller on some sound cards produced by miro and\n" "Cardinal Technologies. The main function of the ACI is to control\n" "the mixer and to get a product identification.\n" "\n" "This VoxWare ACI driver currently supports the ACI functions on the\n" "miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI\n" "also controls the radio tuner. This is supported in the video4linux\n" "miropcm20 driver (say M or Y here and go back to \"Multimedia\n" "devices\" -> \"Radio Adapters\").\n" "\n" "This driver is also available as a module and will be called aci.\n" msgstr "" #: sound/oss/Kconfig:601 msgid "Crystal CS4232 based (PnP) cards" msgstr "" #: sound/oss/Kconfig:603 msgid "" "Say Y here if you have a card based on the Crystal CS4232 chip set,\n" "which uses its own Plug and Play protocol.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"cs4232=,,,,,\" to the kernel\n" "command line.\n" "\n" "See for more information on\n" "configuring this card.\n" msgstr "" #: sound/oss/Kconfig:615 msgid "Ensoniq SoundScape support" msgstr "" #: sound/oss/Kconfig:617 msgid "" "Answer Y if you have a sound card based on the Ensoniq SoundScape\n" "chipset. Such cards are being manufactured at least by Ensoniq, Spea\n" "and Reveal (Reveal makes also other cards).\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"sscape=,,,,\" to the kernel command\n" "line.\n" msgstr "" #: sound/oss/Kconfig:627 msgid "Gravis Ultrasound support" msgstr "" #: sound/oss/Kconfig:629 msgid "" "Say Y here for any type of Gravis Ultrasound card, including the GUS\n" "or GUS MAX. See also for more\n" "information on configuring this card with modules.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"gus=,,,\" to the kernel command line.\n" msgstr "" #: sound/oss/Kconfig:638 msgid "16 bit sampling option of GUS (_NOT_ GUS MAX)" msgstr "" #: sound/oss/Kconfig:640 msgid "" "Support for Gravis Ulstrasound (GUS) cards (other than the GUS),\n" "sampling at 16-bit width.\n" msgstr "" #: sound/oss/Kconfig:645 msgid "GUS MAX support" msgstr "" #: sound/oss/Kconfig:647 msgid "Support for Gravis Ulstrasound MAX.\n" msgstr "" #: sound/oss/Kconfig:651 msgid "Loopback MIDI device support" msgstr "" #: sound/oss/Kconfig:653 msgid "Support for MIDI loopback on port 1 or 2.\n" msgstr "" #: sound/oss/Kconfig:657 msgid "MediaTrix AudioTrix Pro support" msgstr "" #: sound/oss/Kconfig:659 msgid "" "Answer Y if you have the AudioTriX Pro sound card manufactured\n" "by MediaTrix.\n" msgstr "" #: sound/oss/Kconfig:664 msgid "Have TRXPRO.HEX firmware file" msgstr "" #: sound/oss/Kconfig:666 msgid "" "The MediaTrix AudioTrix Pro has an on-board microcontroller which\n" "needs to be initialized by downloading the code from the file\n" "TRXPRO.HEX in the DOS driver directory. If you don't have the\n" "TRXPRO.HEX file handy you may skip this step. However, the SB and\n" "MPU-401 modes of AudioTrix Pro will not work without this file!\n" msgstr "" #: sound/oss/Kconfig:674 msgid "Full pathname of TRXPRO.HEX firmware file" msgstr "" #: sound/oss/Kconfig:677 msgid "Enter the full pathname of your TRXPRO.HEX file, starting from /.\n" msgstr "" #: sound/oss/Kconfig:681 msgid "Microsoft Sound System support" msgstr "" #: sound/oss/Kconfig:683 msgid "" "Again think carefully before answering Y to this question. It's\n" "safe to answer Y if you have the original Windows Sound System card\n" "made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may\n" "say Y in case your card is NOT among these:\n" "\n" "ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,\n" "Ensoniq SoundScape (and compatibles made by Reveal and Spea),\n" "Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,\n" "Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,\n" "Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi\n" "82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft\n" "Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid\n" "SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro\n" "Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,\n" "Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound\n" "Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M\n" "notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM\n" "synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.\n" "\n" "For cards having native support in VoxWare, consult the card\n" "specific instructions in .\n" "Some drivers have their own MSS support and saying Y to this option\n" "will cause a conflict.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"ad1848=,,,[,]\" to the kernel command\n" "line.\n" msgstr "" #: sound/oss/Kconfig:713 msgid "MPU-401 support (NOT for SB16)" msgstr "" #: sound/oss/Kconfig:715 msgid "" "Be careful with this question. The MPU401 interface is supported by\n" "all sound cards. However, some natively supported cards have their\n" "own driver for MPU401. Enabling this MPU401 option with these cards\n" "will cause a conflict. Also, enabling MPU401 on a system that\n" "doesn't really have a MPU401 could cause some trouble. If your card\n" "was in the list of supported cards, look at the card specific\n" "instructions in the file. It\n" "is safe to answer Y if you have a true MPU401 MIDI interface card.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"mpu401=,\" to the kernel command line.\n" msgstr "" #: sound/oss/Kconfig:729 msgid "NM256AV/NM256ZX audio support" msgstr "" #: sound/oss/Kconfig:731 msgid "" "Say M here to include audio support for the NeoMagic 256AV/256ZX\n" "chipsets. These are the audio chipsets found in the Sony\n" "Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt\n" "laptops. It includes support for an AC97-compatible mixer and an\n" "apparently proprietary sound engine.\n" "\n" "See for further information.\n" msgstr "" #: sound/oss/Kconfig:741 msgid "OPTi MAD16 and/or Mozart based cards" msgstr "" #: sound/oss/Kconfig:743 msgid "" "Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi\n" "82C928 or 82C929 or 82C931) audio interface chip. These chips are\n" "quite common so it's possible that many no-name cards have one of\n" "them. In addition the MAD16 chip is used in some cards made by known\n" "manufacturers such as Turtle Beach (Tropez), Reveal (some models)\n" "and Diamond (latest ones). Note however that the Tropez sound cards\n" "have their own driver; if you have one of those, say N here and Y or\n" "M to \"Full support for Turtle Beach WaveFront\", below.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"mad16=,,,,,\" to the\n" "kernel command line.\n" "\n" "See also and\n" " for more information on setting\n" "these cards up as modules.\n" msgstr "" #: sound/oss/Kconfig:762 msgid "Support MIDI in older MAD16 based cards (requires SB)" msgstr "" #: sound/oss/Kconfig:764 msgid "" "Answer Y (or M) if you have an older card based on the C928 or\n" "Mozart chipset and you want to have MIDI support. If you enable this\n" "option you also need to enable support for Sound Blaster.\n" msgstr "" #: sound/oss/Kconfig:770 msgid "ProAudioSpectrum 16 support" msgstr "" #: sound/oss/Kconfig:772 msgid "" "Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio\n" "16 or Logitech SoundMan 16 sound card. Answer N if you have some\n" "other card made by Media Vision or Logitech since those are not\n" "PAS16 compatible. Please read .\n" "It is not necessary to add Sound Blaster support separately; it\n" "is included in PAS support.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"pas2=,,,,,,,\n" "to the kernel command line.\n" msgstr "" #: sound/oss/Kconfig:785 msgid "Enable PAS16 joystick port" msgstr "" #: sound/oss/Kconfig:787 msgid "" "Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick\n" "port.\n" msgstr "" #: sound/oss/Kconfig:792 msgid "PSS (AD1848, ADSP-2115, ESC614) support" msgstr "" #: sound/oss/Kconfig:794 msgid "" "Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven\n" "ADSP-16 or some other card based on the PSS chipset (AD1848 codec +\n" "ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on\n" "how to compile it into the kernel or as a module see the file\n" ".\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"pss=,,,,,\" to the kernel\n" "command line.\n" msgstr "" #: sound/oss/Kconfig:806 msgid "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)" msgstr "" #: sound/oss/Kconfig:808 msgid "" "Answer Y for Beethoven ADSP-16. You may try to say Y also for other\n" "cards if they have master volume, bass, treble, and you can't\n" "control it under Linux. If you answer N for Beethoven ADSP-16, you\n" "can't control master volume, bass, treble and synth volume.\n" "\n" "If you said M to \"PSS support\" above, you may enable or disable this\n" "PSS mixer with the module parameter pss_mixer. For more information\n" "see the file .\n" msgstr "" #: sound/oss/Kconfig:819 msgid "Have DSPxxx.LD firmware file" msgstr "" #: sound/oss/Kconfig:821 msgid "" "If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y\n" "to include this file. Without this file the synth device (OPL) may\n" "not work.\n" msgstr "" #: sound/oss/Kconfig:827 msgid "Full pathname of DSPxxx.LD firmware file" msgstr "" #: sound/oss/Kconfig:830 msgid "" "Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,\n" "starting from /.\n" msgstr "" #: sound/oss/Kconfig:835 msgid "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" msgstr "" #: sound/oss/Kconfig:837 #, fuzzy msgid "" "Answer Y if you have an original Sound Blaster card made by Creative\n" "Labs or a 100% hardware compatible clone (like the Thunderboard or\n" "SM Games). For an unknown card you may answer Y if the card claims\n" "to be Sound Blaster-compatible.\n" "\n" "Please read the file .\n" "\n" "You should also say Y here for cards based on the Avance Logic\n" "ALS-007 and ALS-1X0 chips (read ) and\n" "for cards based on ESS chips (read\n" " and\n" "). If you have an SB AWE 32 or SB AWE\n" "64, say Y here and also to \"AWE32 synth\" below and read\n" ". If you have an IBM Mwave\n" "card, say Y here and read .\n" "\n" "If you compile the driver into the kernel and don't want to use\n" "isapnp, you have to add \"sb=,,,\" to the kernel\n" "command line.\n" "\n" "You can say M here to compile this driver as a module; the module is\n" "called sb.\n" msgstr "" "Answer Y if you have an original Sound Blaster card made by Creative\n" "Labs or a 100% hardware compatible clone (like the Thunderboard or\n" "SM Games). For an unknown card you may answer Y if the card claims\n" "to be Sound Blaster-compatible.\n" "\n" "Please read the file .\n" "\n" "You should also say Y here for cards based on the Avance Logic\n" "ALS-007 and ALS-1X0 chips (read ) and\n" "for cards based on ESS chips (read\n" " and\n" "). If you have an SB AWE 32 or SB AWE\n" "64, say Y here and also to \"AWE32 synth\" below and read \n" ". If you have an IBM Mwave\n" "card, say Y here and read .\n" "\n" "If you compile the driver into the kernel and don't want to use\n" "isapnp, you have to add \"sb=,,,\" to the kernel\n" "command line.\n" "\n" "You can say M here to compile this driver as a module; the module is\n" "called sb.o.\n" "\n" #: sound/oss/Kconfig:862 msgid "AWE32 synth" msgstr "" #: sound/oss/Kconfig:864 msgid "" "Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or\n" "similar sound card. See ,\n" " and the Soundblaster-AWE\n" "mini-HOWTO, available from \n" "for more info.\n" msgstr "" #: sound/oss/Kconfig:872 msgid "" "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/" "soundcards" msgstr "" #: sound/oss/Kconfig:874 msgid "" "Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card\n" "and read the files and\n" ".\n" msgstr "" #: sound/oss/Kconfig:880 msgid "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers" msgstr "" #: sound/oss/Kconfig:882 msgid "" "Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez\n" "sound card.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"maui=,\" to the kernel command line.\n" msgstr "" #: sound/oss/Kconfig:890 msgid "Have OSWF.MOT firmware file" msgstr "" #: sound/oss/Kconfig:892 msgid "" "Turtle Beach Maui and Tropez sound cards have a microcontroller\n" "which needs to be initialized prior to use. OSWF.MOT is a file\n" "distributed with the card's DOS/Windows drivers. Answer Y if you\n" "have this file.\n" msgstr "" #: sound/oss/Kconfig:899 msgid "Full pathname of OSWF.MOT firmware file" msgstr "" #: sound/oss/Kconfig:902 msgid "Enter the full pathname of your OSWF.MOT file, starting from /.\n" msgstr "" #: sound/oss/Kconfig:906 msgid "Yamaha FM synthesizer (YM3812/OPL-3) support" msgstr "" #: sound/oss/Kconfig:908 msgid "" "Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).\n" "Answering Y is usually a safe and recommended choice, however some\n" "cards may have software (TSR) FM emulation. Enabling FM support with\n" "these cards may cause trouble (I don't currently know of any such\n" "cards, however). Please read the file\n" " if your card has an OPL3 chip.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"opl3=\" to the kernel command line.\n" "\n" "If unsure, say Y.\n" msgstr "" #: sound/oss/Kconfig:922 msgid "Yamaha OPL3-SA1 audio controller" msgstr "" #: sound/oss/Kconfig:924 msgid "" "Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is\n" "usually built into motherboards. Read\n" " for details.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"opl3sa=,,,,,\" to the kernel\n" "command line.\n" msgstr "" #: sound/oss/Kconfig:934 msgid "Yamaha OPL3-SA2 and SA3 based PnP cards" msgstr "" #: sound/oss/Kconfig:936 msgid "" "Say Y or M if you have a card based on one of these Yamaha sound\n" "chipsets or the \"SAx\", which is actually a SA3. Read\n" " for more information on\n" "configuring these cards.\n" "\n" "If you compile the driver into the kernel and do not also\n" "configure in the optional ISA PnP support, you will have to add\n" "\"opl3sa2=,,,,,\" to the kernel\n" "command line.\n" msgstr "" #: sound/oss/Kconfig:948 msgid "Yamaha YMF7xx PCI audio (native mode)" msgstr "" #: sound/oss/Kconfig:950 msgid "" "Support for Yamaha cards including the YMF711, YMF715, YMF718,\n" "YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.\n" msgstr "" #: sound/oss/Kconfig:955 msgid "Yamaha PCI legacy ports support" msgstr "" #: sound/oss/Kconfig:957 msgid "Support for YMF7xx PCI cards emulating an MP401.\n" msgstr "" #: sound/oss/Kconfig:961 msgid "6850 UART support" msgstr "" #: sound/oss/Kconfig:963 msgid "" "This option enables support for MIDI interfaces based on the 6850\n" "UART chip. This interface is rarely found on sound cards. It's safe\n" "to answer N to this question.\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"uart6850=,\" to the kernel command line.\n" msgstr "" #: sound/oss/Kconfig:972 msgid "Gallant Audio Cards (SC-6000 and SC-6600 based)" msgstr "" #: sound/oss/Kconfig:974 msgid "" "Answer Y if you have a Gallant's Audio Excel DSP 16 card. This\n" "driver supports Audio Excel DSP 16 but not the III nor PnP versions\n" "of this card.\n" "\n" "The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or\n" "a Microsoft Sound System card, so you should have said Y to either\n" "\"100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support\"\n" "or \"Microsoft Sound System support\", above, and you need to answer\n" "the \"MSS emulation\" and \"SBPro emulation\" questions below\n" "accordingly. You should say Y to one and only one of these two\n" "questions.\n" "\n" "Read the file and the head of\n" " as well as\n" " to get more information\n" "about this driver and its configuration.\n" msgstr "" #: sound/oss/Kconfig:993 msgid "SC-6600 based audio cards (new Audio Excel DSP 16)" msgstr "" #: sound/oss/Kconfig:995 msgid "" "The SC6600 is the new version of DSP mounted on the Audio Excel DSP\n" "16 cards. Find in the manual the FCC ID of your audio card and\n" "answer Y if you have an SC6600 DSP.\n" msgstr "" #: sound/oss/Kconfig:1001 msgid "Activate SC-6600 Joystick Interface" msgstr "" #: sound/oss/Kconfig:1003 msgid "" "Say Y here in order to use the joystick interface of the Audio Excel\n" "DSP 16 card.\n" msgstr "" #: sound/oss/Kconfig:1008 msgid "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)" msgstr "" #: sound/oss/Kconfig:1011 msgid "" "This is used to activate the CD-ROM interface of the Audio Excel\n" "DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no\n" "CD-ROM present.\n" msgstr "" #: sound/oss/Kconfig:1017 msgid "SC-6600 CDROM Interface I/O Address" msgstr "" #: sound/oss/Kconfig:1020 msgid "" "Base I/O port address for the CD-ROM interface of the Audio Excel\n" "DSP 16 card.\n" msgstr "" #: sound/oss/Kconfig:1025 msgid "Audio Excel DSP 16" msgstr "" #: sound/oss/Kconfig:1030 msgid "MSS emulation" msgstr "" #: sound/oss/Kconfig:1032 msgid "" "Answer Y if you want your audio card to emulate Microsoft Sound\n" "System. You should then say Y to \"Microsoft Sound System support\"\n" "and say N to \"Audio Excel DSP 16 (SBPro emulation)\".\n" msgstr "" #: sound/oss/Kconfig:1038 msgid "SBPro emulation" msgstr "" #: sound/oss/Kconfig:1040 msgid "" "Answer Y if you want your audio card to emulate Sound Blaster Pro.\n" "You should then say Y to \"100% Sound Blaster compatibles\n" "(SB16/32/64, ESS, Jazz16) support\" and N to \"Audio Excel DSP 16 (MSS\n" "emulation)\".\n" "\n" "If you compile the driver into the kernel, you have to add\n" "\"aedsp16=,,,,,\" to the kernel\n" "command line.\n" msgstr "" #: sound/oss/Kconfig:1053 msgid "Audio Excel DSP 16 (MPU401 emulation)" msgstr "" #: sound/oss/Kconfig:1055 msgid "" "Answer Y if you want your audio card to emulate the MPU-401 midi\n" "interface. You should then also say Y to \"MPU-401 support\".\n" "\n" "Note that the I/O base for MPU-401 support of aedsp16 is the same\n" "you have selected for \"MPU-401 support\". If you are using this\n" "driver as a module you have to specify the MPU I/O base address with\n" "the parameter 'mpu_base=0xNNN'.\n" msgstr "" #: sound/oss/Kconfig:1065 msgid "VIDC 16-bit sound" msgstr "" #: sound/oss/Kconfig:1067 msgid "" "16-bit support for the VIDC onboard sound hardware found on Acorn\n" "machines.\n" msgstr "" #: sound/oss/Kconfig:1072 msgid "Netwinder WaveArtist" msgstr "" #: sound/oss/Kconfig:1074 msgid "" "Say Y here to include support for the Rockwell WaveArtist sound\n" "system. This driver is mainly for the NetWinder.\n" msgstr "" #: sound/oss/Kconfig:1079 msgid "TV card (bt848) mixer support" msgstr "" #: sound/oss/Kconfig:1081 msgid "" "Support for audio mixer facilities on the BT848 TV frame-grabber\n" "card.\n" msgstr "" #: sound/oss/Kconfig:1086 msgid "XpressAudio Sound Blaster emulation" msgstr "" #: sound/oss/Kconfig:1090 msgid "ALi5455 audio support" msgstr "" #: sound/oss/Kconfig:1094 msgid "ForteMedia FM801 driver" msgstr "" #: sound/oss/Kconfig:1096 msgid "" "Say Y or M if you want driver support for the ForteMedia FM801 PCI\n" "audio controller (Abit AU10, Genius Sound Maker, HP Workstation\n" "zx2000, and others).\n" msgstr "" #: sound/oss/Kconfig:1102 msgid "RME Hammerfall (RME96XX) support" msgstr "" #: sound/oss/Kconfig:1104 msgid "" "Say Y or M if you have a Hammerfall or Hammerfall light\n" "multichannel card from RME. If you want to access advanced\n" "features of the card, read .\n" msgstr "" #: sound/oss/Kconfig:1110 msgid "AD1980 front/back switch plugin" msgstr "" #: sound/oss/Kconfig:1114 msgid "SuperH DAC audio support" msgstr "" #: sound/oss/Kconfig:1118 msgid " DAC channel" msgstr ""