# Linux kernel 2.6.12 Kconfig .pot file
# Licensed under GNU GPL v2
#
# The Linux Kernel Translation Project
# http://tlktp.sourceforge.net
#
# Translators:
#
msgid ""
msgstr ""
"Project-Id-Version: Linux 2.6.12\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2005-06-26 01:06+0100\n"
"PO-Revision-Date: 2002-08-29 23:36+0100\n"
"Last-Translator: Karl Eichwalder\n"
"Language-Team: German\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: drivers/mtd/maps/Kconfig:4
msgid "Mapping drivers for chip access"
msgstr ""

#: drivers/mtd/maps/Kconfig:8
msgid "Support non-linear mappings of flash chips"
msgstr ""

#: drivers/mtd/maps/Kconfig:10
msgid ""
"This causes the chip drivers to allow for complicated\n"
"paged mappings of flash chips.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:15
msgid "CFI Flash device in physical memory map"
msgstr ""

#: drivers/mtd/maps/Kconfig:17
msgid ""
"This provides a 'mapping' driver which allows the CFI probe and\n"
"command set driver code to communicate with flash chips which\n"
"are mapped physically into the CPU's memory. You will need to\n"
"configure the physical address and size of the flash chips on\n"
"your particular board as well as the bus width, either statically\n"
"with config options or at run-time.\n"
msgstr ""

# drivers/mtd/maps/Kconfig:26 drivers/mtd/maps/Kconfig:425
#: drivers/mtd/maps/Kconfig:26 drivers/mtd/maps/Kconfig:425
msgid "Physical start address of flash mapping"
msgstr ""

#: drivers/mtd/maps/Kconfig:29
msgid ""
"This is the physical memory location at which the flash chips\n"
"are mapped on your particular target board. Refer to the\n"
"memory map which should hopefully be in the documentation for\n"
"your board.\n"
"Ignore this option if you use run-time physmap configuration\n"
"(i.e., run-time calling physmap_configure()).\n"
msgstr ""

# drivers/mtd/maps/Kconfig:38 drivers/mtd/maps/Kconfig:435
#: drivers/mtd/maps/Kconfig:38 drivers/mtd/maps/Kconfig:435
msgid "Physical length of flash mapping"
msgstr ""

#: drivers/mtd/maps/Kconfig:41
msgid ""
"This is the total length of the mapping of the flash chips on\n"
"your particular board. If there is space, or aliases, in the\n"
"physical memory map between the chips, this could be larger\n"
"than the total amount of flash present. Refer to the memory\n"
"map which should hopefully be in the documentation for your\n"
"board.\n"
"Ignore this option if you use run-time physmap configuration\n"
"(i.e., run-time calling physmap_configure()).\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:52
msgid "Bank width in octets"
msgstr ""

#: drivers/mtd/maps/Kconfig:55
msgid ""
"This is the total width of the data bus of the flash devices\n"
"in octets. For example, if you have a data bus width of 32\n"
"bits, you would set the bus width octect value to 4. This is\n"
"used internally by the CFI drivers.\n"
"Ignore this option if you use run-time physmap configuration\n"
"(i.e., run-time calling physmap_configure()).\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:64
#, fuzzy
msgid "Sun Microsystems userflash support"
msgstr "Microsoft Busmaus Unterstützung"

#: drivers/mtd/maps/Kconfig:66
msgid ""
"This provides a 'mapping' driver which supports the way in\n"
"which user-programmable flash chips are connected on various\n"
"Sun Microsystems boardsets.  This driver will require CFI support\n"
"in the kernel, so if you did not enable CFI previously, do that now.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:73
msgid "CFI Flash device mapped on Photron PNC-2000"
msgstr ""

#: drivers/mtd/maps/Kconfig:75
msgid ""
"PNC-2000 is the name of Network Camera product from PHOTRON\n"
"Ltd. in Japan. It uses CFI-compliant flash.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:80
msgid "CFI Flash device mapped on AMD SC520 CDP"
msgstr ""

#: drivers/mtd/maps/Kconfig:82
msgid ""
"The SC520 CDP board has two banks of CFI-compliant chips and one\n"
"Dual-in-line JEDEC chip. This 'mapping' driver supports that\n"
"arrangement, implementing three MTD devices.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:88
msgid "CFI Flash device mapped on AMD NetSc520"
msgstr ""

#: drivers/mtd/maps/Kconfig:90
msgid ""
"This enables access routines for the flash chips on the AMD NetSc520\n"
"demonstration board. If you have one of these boards and would like\n"
"to use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:96
msgid "JEDEC Flash device mapped on Technologic Systems TS-5500"
msgstr ""

#: drivers/mtd/maps/Kconfig:98
msgid ""
"This provides a driver for the on-board flash of the Technologic\n"
"System's TS-5500 board. The flash is split into 3 partitions\n"
"which are accessed as separate MTD devices.\n"
"\n"
"mtd0 and mtd2 are the two BIOS drives. Unfortunately the BIOS\n"
"uses a proprietary flash translation layer from General Software,\n"
"which is not supported (the drives cannot be mounted). You can\n"
"create your own file system (jffs for example), but the BIOS\n"
"won't be able to boot from it.\n"
"\n"
"mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.\n"
"\n"
"Note that jumper 3 (\"Write Enable Drive A\") must be set\n"
"otherwise detection won't succeeed.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:115
msgid "CFI Flash device mapped on Arcom SBC-GXx boards"
msgstr ""

#: drivers/mtd/maps/Kconfig:117
msgid ""
"This provides a driver for the on-board flash of Arcom Control\n"
"Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.\n"
"By default the flash is split into 3 partitions which are accessed\n"
"as separate MTD devices. This board utilizes Intel StrataFlash.\n"
"More info at\n"
"<http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:126
msgid "CFI Flash device mapped on Arcom ELAN-104NC"
msgstr ""

#: drivers/mtd/maps/Kconfig:128
msgid ""
"This provides a driver for the on-board flash of the Arcom Control\n"
"System's ELAN-104NC development board. By default the flash\n"
"is split into 3 partitions which are accessed as separate MTD\n"
"devices. This board utilizes Intel StrataFlash. More info at\n"
"<http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:136
msgid "CFI Flash device mapped on Intel Lubbock XScale eval board"
msgstr ""

#: drivers/mtd/maps/Kconfig:138
msgid ""
"This provides a driver for the on-board flash of the Intel\n"
"'Lubbock' XScale evaluation board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:143
msgid "JEDEC Flash device mapped on Octagon 5066 SBC"
msgstr ""

#: drivers/mtd/maps/Kconfig:145
msgid ""
"This provides a 'mapping' driver which supports the way in which\n"
"the flash chips are connected in the Octagon-5066 Single Board\n"
"Computer. More information on the board is available at\n"
"<http://www.octagonsystems.com/CPUpages/5066.html>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:152
msgid "JEDEC Flash device mapped on Tempustech VMAX SBC301"
msgstr ""

#: drivers/mtd/maps/Kconfig:154
msgid ""
"This provides a 'mapping' driver which supports the way in which\n"
"the flash chips are connected in the Tempustech VMAX SBC301 Single\n"
"Board Computer. More information on the board is available at\n"
"<http://www.tempustech.com/>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:161
msgid "Flash device mapped with DOCCS on NatSemi SCx200"
msgstr ""

#: drivers/mtd/maps/Kconfig:163
msgid ""
"Enable support for a flash chip mapped using the DOCCS signal on a\n"
"National Semiconductor SCx200 processor.\n"
"\n"
"If you don't know what to do here, say N.\n"
"\n"
"If compiled as a module, it will be called scx200_docflash.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:172
msgid "BIOS flash chip on AMD76x southbridge"
msgstr ""

#: drivers/mtd/maps/Kconfig:174
msgid ""
"Support for treating the BIOS flash chip on AMD76x motherboards\n"
"as an MTD device - with this you can reprogram your BIOS.\n"
"\n"
"BE VERY CAREFUL.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:181
msgid "BIOS flash chip on Intel Controller Hub 2/3/4/5"
msgstr ""

#: drivers/mtd/maps/Kconfig:183
msgid ""
"Support for treating the BIOS flash chip on ICHX motherboards\n"
"as an MTD device - with this you can reprogram your BIOS.\n"
"\n"
"BE VERY CAREFUL.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:190
msgid "BIOS flash chip on Intel SCB2 boards"
msgstr ""

#: drivers/mtd/maps/Kconfig:192
msgid ""
"Support for treating the BIOS flash chip on Intel SCB2 boards\n"
"as an MTD device - with this you can reprogram your BIOS.\n"
"\n"
"BE VERY CAREFUL.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:199
msgid "Flash chips on Tsunami TIG bus"
msgstr ""

#: drivers/mtd/maps/Kconfig:201
msgid "Support for the flash chip on Tsunami TIG bus.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:205
msgid "Flash chips on LASAT board"
msgstr ""

#: drivers/mtd/maps/Kconfig:207
msgid "Support for the flash chips on the Lasat 100 and 200 boards.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:211
msgid "CFI flash device on SnapGear/SecureEdge"
msgstr ""

#: drivers/mtd/maps/Kconfig:213
msgid "Support for flash chips on NETtel/SecureEdge/SnapGear boards.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:217
msgid "Flash devices on Alchemy PB1xxx boards"
msgstr ""

#: drivers/mtd/maps/Kconfig:219
msgid "Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:223
msgid "PB1x00 boot flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:225
msgid ""
"Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board.\n"
"You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use\n"
"both banks.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:231
msgid "PB1x00 user flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:234
msgid ""
"Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board.\n"
"You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use\n"
"both banks.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:240
msgid "Flash devices on Alchemy PB1550 board"
msgstr ""

#: drivers/mtd/maps/Kconfig:242
msgid "Flash memory access on Alchemy Pb1550 board\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:246
msgid "PB1550 boot flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:248
msgid ""
"Use the first of the two 64MiB flash banks on Pb1550 board.\n"
"You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use\n"
"both banks.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:254
msgid "PB1550 user flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:257
msgid ""
"Use the second of the two 64MiB flash banks on Pb1550 board.\n"
"You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use\n"
"both banks.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:263
msgid "Flash devices on Alchemy DB1550 board"
msgstr ""

#: drivers/mtd/maps/Kconfig:265
msgid "Flash memory access on Alchemy Db1550 board\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:269
msgid "DB1550 boot flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:271
msgid ""
"Use the first of the two 64MiB flash banks on Db1550 board.\n"
"You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use\n"
"both banks.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:277
msgid "DB1550 user flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:280
msgid ""
"Use the second of the two 64MiB flash banks on Db1550 board.\n"
"You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use\n"
"both banks.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:286
msgid "CFI Flash device mapped on DIL/Net PC"
msgstr ""

#: drivers/mtd/maps/Kconfig:288
msgid ""
"MTD map driver for SSV DIL/Net PC Boards \"DNP\" and \"ADNP\".\n"
"For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>\n"
"and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:294
msgid "Size of DIL/Net PC flash boot partition"
msgstr ""

#: drivers/mtd/maps/Kconfig:297
msgid ""
"The amount of space taken up by the kernel or Etherboot\n"
"on the DIL/Net PC flash chips.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:302
msgid "BIOS flash chip on Intel L440GX boards"
msgstr ""

#: drivers/mtd/maps/Kconfig:304
msgid ""
"Support for treating the BIOS flash chip on Intel L440GX motherboards\n"
"as an MTD device - with this you can reprogram your BIOS.\n"
"\n"
"BE VERY CAREFUL.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:311
msgid "Flash device on SBC8240"
msgstr ""

#: drivers/mtd/maps/Kconfig:313
msgid ""
"Flash access on the SBC8240 board from Wind River.  See\n"
"<http://www.windriver.com/products/sbc8240/>\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:318
msgid "CFI Flash device mapped on TQM8XXL"
msgstr ""

#: drivers/mtd/maps/Kconfig:320
msgid ""
"The TQM8xxL PowerPC board has up to two banks of CFI-compliant\n"
"chips, currently uses AMD one. This 'mapping' driver supports\n"
"that arrangement, allowing the CFI probe and command set driver\n"
"code to communicate with the chips on the TQM8xxL board. More at\n"
"<http://www.denx.de/embedded-ppc-en.html>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:328
msgid "CFI Flash device mapped on RPX Lite or CLLF"
msgstr ""

#: drivers/mtd/maps/Kconfig:330
msgid ""
"The RPXLite PowerPC board has CFI-compliant chips mapped in\n"
"a strange sparse mapping. This 'mapping' driver supports that\n"
"arrangement, allowing the CFI probe and command set driver code\n"
"to communicate with the chips on the RPXLite board. More at\n"
"<http://www.embeddedplanet.com/>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:338
msgid "System flash on MBX860 board"
msgstr ""

#: drivers/mtd/maps/Kconfig:340
msgid ""
"This enables access routines for the flash chips on the Motorola\n"
"MBX860 board. If you have one of these boards and would like\n"
"to use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:346
msgid "CFI Flash device mapped on D-Box2"
msgstr ""

#: drivers/mtd/maps/Kconfig:348
msgid ""
"This enables access routines for the flash chips on the Nokia/Sagem\n"
"D-Box 2 board. If you have one of these boards and would like to use\n"
"the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:354
msgid "CFI Flash device mapping on FlagaDM"
msgstr ""

#: drivers/mtd/maps/Kconfig:356
msgid ""
"Mapping for the Flaga digital module. If you don't have one, ignore\n"
"this setting.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:361
msgid "CFI Flash device mapped on IBM 405LP Beech"
msgstr ""

#: drivers/mtd/maps/Kconfig:363
msgid ""
"This enables access routines for the flash chips on the IBM\n"
"405LP Beech board. If you have one of these boards and would like\n"
"to use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:369
msgid "CFI Flash device mapped on IBM 405LP Arctic"
msgstr ""

#: drivers/mtd/maps/Kconfig:371
msgid ""
"This enables access routines for the flash chips on the IBM 405LP\n"
"Arctic board. If you have one of these boards and would like to\n"
"use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:377
msgid "Flash device mapped on IBM 405GP Walnut"
msgstr ""

#: drivers/mtd/maps/Kconfig:379
msgid ""
"This enables access routines for the flash chips on the IBM 405GP\n"
"Walnut board. If you have one of these boards and would like to\n"
"use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:385
msgid "Flash devices mapped on IBM 440GP Ebony"
msgstr ""

#: drivers/mtd/maps/Kconfig:387
msgid ""
"This enables access routines for the flash chips on the IBM 440GP\n"
"Ebony board. If you have one of these boards and would like to\n"
"use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:393
msgid "Flash devices mapped on IBM 440GX Ocotea"
msgstr ""

#: drivers/mtd/maps/Kconfig:395
msgid ""
"This enables access routines for the flash chips on the IBM 440GX\n"
"Ocotea board. If you have one of these boards and would like to\n"
"use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:401
msgid "CFI Flash devices mapped on IBM Redwood"
msgstr ""

#: drivers/mtd/maps/Kconfig:403
msgid ""
"This enables access routines for the flash chips on the IBM\n"
"Redwood board. If you have one of these boards and would like to\n"
"use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:409
msgid "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
msgstr ""

#: drivers/mtd/maps/Kconfig:411
msgid ""
"This provides a mapping driver for the Integrated Technology\n"
"Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR\n"
"Reference Board. It provides the necessary addressing, length,\n"
"buswidth, vpp code and addition setup of the flash device for\n"
"these boards. In addition, this mapping driver can be used for\n"
"other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/\n"
"LEN/BUSWIDTH parameters. This mapping will provide one mtd device\n"
"using one partition. The start address can be offset from the\n"
"beginning of flash and the len can be less than the total flash\n"
"device size to allow a window into the flash. Both CFI and JEDEC\n"
"probes are called.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:428
msgid ""
"This is the physical memory location that the MTD driver will\n"
"use for the flash chips on your particular target board.\n"
"Refer to the memory map which should hopefully be in the\n"
"documentation for your board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:438
msgid ""
"This is the total length that the MTD driver will use for the\n"
"flash chips on your particular board.  Refer to the memory\n"
"map which should hopefully be in the documentation for your\n"
"board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:445
msgid "Bus width in octets"
msgstr ""

#: drivers/mtd/maps/Kconfig:448
msgid ""
"This is the total bus width of the mapping of the flash chips\n"
"on your particular board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:453
msgid "Momenco Ocelot boot flash device"
msgstr ""

#: drivers/mtd/maps/Kconfig:455
msgid ""
"This enables access routines for the boot flash device and for the\n"
"NVRAM on the Momenco Ocelot board. If you have one of these boards\n"
"and would like access to either of these, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:461
msgid "CFI Flash device mapped on Hitachi SolutionEngine"
msgstr ""

#: drivers/mtd/maps/Kconfig:463
msgid ""
"This enables access to the flash chips on the Hitachi SolutionEngine and\n"
"similar boards. Say 'Y' if you are building a kernel for such a board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:468
msgid "CFI Flash device mapped on ARM Integrator/P720T"
msgstr ""

#: drivers/mtd/maps/Kconfig:472
msgid "Cirrus CDB89712 evaluation board mappings"
msgstr ""

#: drivers/mtd/maps/Kconfig:474
msgid ""
"This enables access to the flash or ROM chips on the CDB89712 board.\n"
"If you have such a board, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:479
msgid "CFI Flash device mapped on StrongARM SA11x0"
msgstr ""

#: drivers/mtd/maps/Kconfig:481
msgid ""
"This enables access to the flash chips on most platforms based on\n"
"the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.\n"
"If you have such a board, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:487
msgid "CFI Flash device mapped on Compaq/HP iPAQ"
msgstr ""

#: drivers/mtd/maps/Kconfig:489
msgid "This provides a driver for the on-board flash of the iPAQ.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:493
msgid "CFI Flash device mapped on DC21285 Footbridge"
msgstr ""

#: drivers/mtd/maps/Kconfig:495
msgid ""
"This provides a driver for the flash accessed using Intel's\n"
"21285 bridge used with Intel's StrongARM processors. More info at\n"
"<http://www.intel.com/design/bridge/docs/21285_documentation.htm>.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:501
msgid "CFI Flash device mapped on the XScale IQ80310 board"
msgstr ""

#: drivers/mtd/maps/Kconfig:503
msgid ""
"This enables access routines for the flash chips on the Intel XScale\n"
"IQ80310 evaluation board. If you have one of these boards and would\n"
"like to use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:509
msgid "CFI Flash device mapped on Intel IXP4xx based systems"
msgstr ""

#: drivers/mtd/maps/Kconfig:511
msgid ""
"This enables MTD access to flash devices on platforms based\n"
"on Intel's IXP4xx family of network processors such as the\n"
"IXDP425 and Coyote. If you have an IXP4xx based board and\n"
"would like to use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:518
msgid "CFI Flash device mapped on Intel IXP2000 based systems"
msgstr ""

#: drivers/mtd/maps/Kconfig:520
msgid ""
"This enables MTD access to flash devices on platforms based\n"
"on Intel's IXP2000 family of network processors such as the\n"
"IXDP425 and Coyote. If you have an IXP2000 based board and\n"
"would like to use the flash chips on it, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:527
msgid "CFI Flash device mapped on Epxa10db"
msgstr ""

#: drivers/mtd/maps/Kconfig:529
msgid ""
"This enables support for the flash devices on the Altera\n"
"Excalibur XA10 Development Board. If you are building a kernel\n"
"for on of these boards then you should say 'Y' otherwise say 'N'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:535
msgid "CFI Flash device mapped on the FortuNet board"
msgstr ""

#: drivers/mtd/maps/Kconfig:537
msgid ""
"This enables access to the Flash on the FortuNet board.  If you\n"
"have such a board, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:542
msgid "NV-RAM mapping AUTCPU12 board"
msgstr ""

#: drivers/mtd/maps/Kconfig:544
msgid ""
"This enables access to the NV-RAM on autronix autcpu12 board.\n"
"If you have such a board, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:549
msgid "CFI Flash device mapped on EDB7312"
msgstr ""

#: drivers/mtd/maps/Kconfig:551
msgid ""
"This enables access to the CFI Flash on the Cogent EDB7312 board.\n"
"If you have such a board, say 'Y' here.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:556
msgid "JEDEC Flash device mapped on impA7"
msgstr ""

#: drivers/mtd/maps/Kconfig:558
msgid ""
"This enables access to the NOR Flash on the impA7 board of\n"
"implementa GmbH. If you have such a board, say 'Y' here.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:563
msgid ""
"JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
msgstr ""

#: drivers/mtd/maps/Kconfig:565
msgid ""
"This enables access to the flash chips on the Ceiva/Polaroid\n"
"PhotoMax Digital Picture Frame.\n"
"If you have such a device, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:571
msgid "NOR Flash device on TOTO board"
msgstr ""

#: drivers/mtd/maps/Kconfig:573
msgid ""
"This enables access to the NOR flash on the Texas Instruments\n"
"TOTO board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:578
msgid "Hynix evaluation board mappings"
msgstr ""

#: drivers/mtd/maps/Kconfig:580
msgid ""
"This enables access to the flash chips on the Hynix evaluation boards.\n"
"If you have such a board, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:585
msgid "CFI Flash device mapped on Interface MPC-1211"
msgstr ""

#: drivers/mtd/maps/Kconfig:587
msgid ""
"This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-"
"SH02).\n"
"If you have such a board, say 'Y'.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:593
msgid "PCI MTD driver"
msgstr ""

#: drivers/mtd/maps/Kconfig:595
msgid ""
"Mapping for accessing flash devices on add-in cards like the Intel XScale\n"
"IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode\n"
"(please see the manual for the link settings).\n"
"\n"
"If you are not sure, say N.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:603
msgid "PCMCIA MTD driver"
msgstr ""

#: drivers/mtd/maps/Kconfig:605
msgid ""
"Map driver for accessing PCMCIA linear flash memory cards. These\n"
"cards are usually around 4-16MiB in size. This does not include\n"
"Compact Flash cards which are treated as IDE devices.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:611
#, fuzzy
msgid "Generic uClinux RAM/ROM filesystem support"
msgstr "Unterstützung für das /proc-Dateisystem"

#: drivers/mtd/maps/Kconfig:613
msgid "Map driver to support image based filesystems for uClinux.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:617
msgid "Map driver for WindRiver PowerQUICC II MPC82xx board"
msgstr ""

#: drivers/mtd/maps/Kconfig:624
msgid ""
"Map driver for WindRiver PowerQUICC II MPC82xx board. Drives\n"
"all three flash regions on CS0, CS1 and CS6 if they are configured\n"
"correctly by the boot loader.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:630
msgid "Map driver for Dy-4 SVME/DMV-182 board."
msgstr ""

#: drivers/mtd/maps/Kconfig:636
msgid "Map driver for Dy-4 SVME/DMV-182 board.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:640
msgid "Map driver for Simtec BAST (EB2410ITX)"
msgstr ""

#: drivers/mtd/maps/Kconfig:645
msgid ""
"Map driver for NOR flash on the Simtec BAST (EB2410ITX).\n"
"\n"
"Note, this driver *cannot* over-ride the WP link on the\n"
"board, or currently detect the state of the link.\n"
msgstr ""

#: drivers/mtd/maps/Kconfig:652
msgid "Maximum size for BAST flash area (MiB)"
msgstr ""

#: drivers/mtd/maps/Kconfig:657
msgid "ROM maped on Sharp SL Series"
msgstr ""

#: drivers/mtd/maps/Kconfig:659
msgid "This enables access to the flash chip on the Sharp SL Series of PDAs.\n"
msgstr ""
