# translation of ru.po to Русский # Linux kernel 2.6.12 Kconfig .pot file # Licensed under GNU GPL v2 # # The Linux Kernel Translation Project # http://tlktp.sourceforge.net # # Translators: # - Костаревым А. Ф. # (http://www.nevod.ru/linux//doc/) # - Ilya Petrov aka Muromec , 2005. # msgid "" msgstr "" "Project-Id-Version: ru\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-06-26 01:06+0100\n" "PO-Revision-Date: 2005-01-19 19:28+0200\n" "Last-Translator: Илья Петров \n" "Language-Team: Русский \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Project-Id-Version kernel 2.6.12\n" "X-Generator: KBabel 1.10\n" #: drivers/char/watchdog/Kconfig:5 msgid "Watchdog Cards" msgstr "" # arch/um/Kconfig_char:163 drivers/char/watchdog/Kconfig:8 #: drivers/char/watchdog/Kconfig:8 msgid "Watchdog Timer Support" msgstr "" #: drivers/char/watchdog/Kconfig:9 #, fuzzy msgid "" "If you say Y here (and to one of the following options) and create a\n" "character special file /dev/watchdog with major number 10 and minor\n" "number 130 using mknod (\"man mknod\"), you will get a watchdog, i.e.:\n" "subsequently opening the file and then failing to write to it for\n" "longer than 1 minute will result in rebooting the machine. This\n" "could be useful for a networked machine that needs to come back\n" "online as fast as possible after a lock-up. There's both a watchdog\n" "implementation entirely in software (which can sometimes fail to\n" "reboot the machine) and a driver for hardware watchdog boards, which\n" "are more robust and can also keep track of the temperature inside\n" "your computer. For details, read \n" "in the kernel source.\n" "\n" "The watchdog is usually used together with the watchdog daemon\n" "which is available from\n" ". This daemon can\n" "also monitor NFS connections and can reboot the machine when the process\n" "table is full.\n" "\n" "If unsure, say N.\n" msgstr "" "Если Вы включите этот режим и создадите специальный файл\n" "/dev/watchdog командой mkdev с major и minor номерами 10, 130,\n" "то получите возможность называемую watchdog. Этот драйвер каждую\n" "минуту открывает этоот файл. Если попытка записи в этот файл\n" "неуспешна, то компьютер перезагружается. Это бывает полезно\n" "для сетевых машин, которые при зависании должны как можно быстрее\n" "без вмешательства оператора вернуться в рабочий режим. Существуют\n" "полностью программные реализации watchdog (которые иногда не\n" "обеспечивают перезагрузки при тяжелых аппаратных зависаниях)\n" "и специальные платы, которые более надежные и могут кроме этого\n" "давать информацию ядру о температура в вашем компьютере. Детали\n" "описаны в файле Documentation/watchdog.txt. Если не уверены,\n" "ответьте N.\n" "Этот драйвер может быть модульным (код, который может быть\n" "по вашему желанию добавлен к уже работающему ядру или удален).\n" "Если Вы собираетесь использовать драйвер в модульном режиме\n" "ответьте M и почитайте документацию по модульным драйверам в \n" "файле Documentation/modules.txt.\n" # arch/um/Kconfig_char:166 drivers/char/watchdog/Kconfig:32 #: drivers/char/watchdog/Kconfig:32 msgid "Disable watchdog shutdown on close" msgstr "" #: drivers/char/watchdog/Kconfig:34 msgid "" "The default watchdog behaviour (which you get if you say N here) is\n" "to stop the timer if the process managing it closes the file\n" "/dev/watchdog. It's always remotely possible that this process might\n" "get killed. If you say Y here, the watchdog cannot be stopped once\n" "it has been started.\n" msgstr "" "Обычно драйвер watchdog останавливает таймер, если процесс,\n" "работающий с файлом /dev/watchdog закрывает его. В этом\n" "случае возможно, что данные процесс может сняться по какой-\n" "нибудь причине и перезагрузки не произойдет. Если Вы включите\n" "этот режим, то wacthdog, однажды стартовав более не останавливается\n" "до перезагрузки машины.\n" #: drivers/char/watchdog/Kconfig:45 msgid "Watchdog Device Drivers" msgstr "" #: drivers/char/watchdog/Kconfig:51 msgid "Software watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:53 #, fuzzy msgid "" "A software monitoring watchdog. This will fail to reboot your system\n" "from some situations that the hardware watchdog will recover\n" "from. Equally it's a lot cheaper to install.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called softdog.\n" msgstr "" "Программное управлением режимом watchdog. Этот режим может не\n" "обеспечивать перезагрузки при некоторых зависании системы,\n" "в которых аппаратный watchdog мог бы помочь.\n" "С другой стороны этот режим намного проще установить.\n" "Этот драйвер может быть модульным (код, который может быть\n" "по вашему желанию добавлен к уже работающему ядру или удален).\n" "Если Вы собираетесь использовать драйвер в модульном режиме\n" "ответьте M и почитайте документацию по модульным драйверам в \n" "файле Documentation/modules.txt.\n" #: drivers/char/watchdog/Kconfig:64 msgid "DC21285 watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:66 msgid "" "The Intel Footbridge chip contains a builtin watchdog circuit. Say Y\n" "here if you wish to use this. Alternatively say M to compile the\n" "driver as a module, which will be called wdt285.\n" "\n" "This driver does not work on all machines. In particular, early CATS\n" "boards have hardware problems that will cause the machine to simply\n" "lock up if the watchdog fires.\n" "\n" "\"If in doubt, leave it out\" - say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:78 msgid "NetWinder WB83C977 watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:80 msgid "" "Say Y here to include support for the WB977 watchdog included in\n" "NetWinder machines. Alternatively say M to compile the driver as\n" "a module, which will be called wdt977.\n" "\n" "Not sure? It's safe to say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:88 msgid "IXP4xx Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:90 msgid "" "Say Y here if to include support for the watchdog timer\n" "in the Intel IXP4xx network processors. This driver can\n" "be built as a module by choosing M. The module will\n" "be called ixp4xx_wdt.\n" "\n" "Note: The internal IXP4xx watchdog does a soft CPU reset\n" "which doesn't reset any peripherals. There are circumstances\n" "where the watchdog will fail to reset the board correctly\n" "(e.g., if the boot ROM is in an unreadable state).\n" "\n" "Say N if you are unsure.\n" msgstr "" #: drivers/char/watchdog/Kconfig:104 msgid "IXP2000 Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:106 msgid "" "Say Y here if to include support for the watchdog timer\n" "in the Intel IXP2000(2400, 2800, 2850) network processors.\n" "This driver can be built as a module by choosing M. The module\n" "will be called ixp2000_wdt.\n" "\n" "Say N if you are unsure.\n" msgstr "" #: drivers/char/watchdog/Kconfig:115 msgid "S3C2410 Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:117 msgid "" "Watchdog timer block in the Samsung S3C2410 chips. This will\n" "reboot the system when the timer expires with the watchdog\n" "enabled.\n" "\n" "The driver is limited by the speed of the system's PCLK\n" "signal, so with reasonbaly fast systems (PCLK around 50-66MHz)\n" "then watchdog intervals of over approximately 20seconds are\n" "unavailable.\n" "\n" "The driver can be built as a module by choosing M, and will\n" "be called s3c2410_wdt\n" msgstr "" #: drivers/char/watchdog/Kconfig:131 msgid "SA1100/PXA2xx watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:133 msgid "" "Watchdog timer embedded into SA11x0 and PXA2xx chips. This will\n" "reboot your system when timeout is reached.\n" "\n" "NOTE: once enabled, this timer cannot be disabled.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called sa1100_wdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:145 msgid "Acquire SBC Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:147 msgid "" "This is the driver for the hardware watchdog on Single Board\n" "Computers produced by Acquire Inc (and others). This watchdog\n" "simply watches your kernel to make sure it doesn't freeze, and if\n" "it does, it reboots your computer after a certain amount of time.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called acquirewdt.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:159 msgid "Advantech SBC Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:161 msgid "" "If you are configuring a Linux kernel for the Advantech single-board\n" "computer, say `Y' here to support its built-in watchdog timer\n" "feature. More information can be found at\n" "\n" msgstr "" #: drivers/char/watchdog/Kconfig:168 msgid "ALi M1535 PMU Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:170 msgid "" "This is the driver for the hardware watchdog on the ALi M1535 PMU.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called alim1535_wdt.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:179 msgid "ALi M7101 PMU Computer Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:181 msgid "" "This is the driver for the hardware watchdog on the ALi M7101 PMU\n" "as used in the x86 Cobalt servers.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called alim7101_wdt.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:191 msgid "AMD Elan SC520 processor Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:193 msgid "" "This is the driver for the hardware watchdog built in to the\n" "AMD \"Elan\" SC520 microcomputer commonly used in embedded systems.\n" "This watchdog simply watches your kernel to make sure it doesn't\n" "freeze, and if it does, it reboots your computer after a certain\n" "amount of time.\n" "\n" "You can compile this driver directly into the kernel, or use\n" "it as a module. The module will be called sc520_wdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:204 msgid "Eurotech CPU-1220/1410 Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:206 msgid "" "Enable support for the watchdog timer on the Eurotech CPU-1220 and\n" "CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product\n" "information are at .\n" msgstr "" #: drivers/char/watchdog/Kconfig:212 msgid "IB700 SBC Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:214 #, fuzzy msgid "" "This is the driver for the hardware watchdog on the IB700 Single\n" "Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog\n" "simply watches your kernel to make sure it doesn't freeze, and if\n" "it does, it reboots your computer after a certain amount of time.\n" "\n" "This driver is like the WDT501 driver but for slightly different hardware.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called ib700wdt.\n" "\n" "Most people will say N.\n" msgstr "" "Этот драйвер обслуживает карту Berkshire Products PC Watchdog. Эта\n" "карта котролирует работу ядра и если ядро зависает, то через\n" "определенный интервал времени компьютер перезагружается. Этот драйвер\n" "поход на драйвер WDT501 но для другого оборудования. Эту карту Вы\n" "можете заказать по адресу:http://www.berkprod.com. Некоторые примеры\n" "rc.local файлов Вы можете найти на ftp.bitgate.com.\n" #: drivers/char/watchdog/Kconfig:228 msgid "ICP Wafer 5823 Single Board Computer Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:230 msgid "" "This is a driver for the hardware watchdog on the ICP Wafer 5823\n" "Single Board Computer (and probably other similar models).\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called wafer5823wdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:238 msgid "Intel i8xx TCO Timer/Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:240 msgid "" "Hardware driver for the TCO timer built into the Intel 82801\n" "I/O Controller Hub family. The TCO (Total Cost of Ownership)\n" "timer is a watchdog timer that will reboot the machine after\n" "its second expiration. The expiration time can be configured\n" "with the \"heartbeat\" parameter.\n" "\n" "On some motherboards the driver may fail to reset the chipset's\n" "NO_REBOOT flag which prevents the watchdog from rebooting the\n" "machine. If this is the case you will get a kernel message like\n" "\"failed to reset NO_REBOOT flag, reboot disabled by hardware\".\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called i8xx_tco.\n" msgstr "" #: drivers/char/watchdog/Kconfig:256 msgid "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:258 msgid "" "This is a driver for National Semiconductor PC87307/PC97307 hardware\n" "watchdog cards as found on the SC1200. This watchdog is mainly used\n" "for power management purposes and can be used to power down the device\n" "during inactivity periods (includes interrupt activity monitoring).\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called sc1200wdt.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:270 msgid "National Semiconductor SCx200 Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:272 msgid "" "Enable the built-in watchdog timer support on the National\n" "Semiconductor SCx200 processors.\n" "\n" "If compiled as a module, it will be called scx200_wdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:279 msgid "SBC-60XX Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:281 msgid "" "This driver can be used with the watchdog timer found on some\n" "single board computers, namely the 6010 PII based computer.\n" "It may well work with other cards. It reads port 0x443 to enable\n" "and re-set the watchdog timer, and reads port 0x45 to disable\n" "the watchdog. If you have a card that behave in similar ways,\n" "you can probably make this driver work with your card as well.\n" "\n" "You can compile this driver directly into the kernel, or use\n" "it as a module. The module will be called sbc60xxwdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:293 msgid "SMA CPU5 Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:295 msgid "" "TBD.\n" "To compile this driver as a module, choose M here: the\n" "module will be called cpu5wdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:301 msgid "W83627HF Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:303 msgid "" "This is the driver for the hardware watchdog on the W83627HF chipset\n" "as used in Advantech PC-9578 and Tyan S2721-533 motherboards\n" "(and likely others). This watchdog simply watches your kernel to\n" "make sure it doesn't freeze, and if it does, it reboots your computer\n" "after a certain amount of time.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called w83627hf_wdt.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:316 msgid "W83877F (EMACS) Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:318 msgid "" "This is the driver for the hardware watchdog on the W83877F chipset\n" "as used in EMACS PC-104 motherboards (and likely others). This\n" "watchdog simply watches your kernel to make sure it doesn't freeze,\n" "and if it does, it reboots your computer after a certain amount of\n" "time.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called w83877f_wdt.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:331 msgid "ZF MachZ Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:333 msgid "" "If you are using a ZF Micro MachZ processor, say Y here, otherwise\n" "N. This is the driver for the watchdog timer builtin on that\n" "processor using ZF-Logic interface. This watchdog simply watches\n" "your kernel to make sure it doesn't freeze, and if it does, it\n" "reboots your computer after a certain amount of time.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called machzwd.\n" msgstr "" #: drivers/char/watchdog/Kconfig:346 msgid "MPC8xx Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:352 msgid "Indy/I2 Hardware Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:354 msgid "" "Hardwaredriver for the Indy's/I2's watchdog. This is a\n" "watchdog timer that will reboot the machine after a 60 second\n" "timer expired and no process has written to /dev/watchdog during\n" "that time.\n" msgstr "" #: drivers/char/watchdog/Kconfig:363 msgid "z/VM Watchdog Timer" msgstr "" #: drivers/char/watchdog/Kconfig:365 msgid "" "IBM s/390 and zSeries machines running under z/VM 5.1 or later\n" "provide a virtual watchdog timer to their guest that cause a\n" "user define Control Program command to be executed after a\n" "timeout.\n" "\n" "To compile this driver as a module, choose M here. The module\n" "will be called vmwatchdog.\n" msgstr "" #: drivers/char/watchdog/Kconfig:377 msgid "SuperH Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:379 msgid "" "This driver adds watchdog support for the integrated watchdog in the\n" "SuperH processors. If you have one of these processors and wish\n" "to have watchdog support enabled, say Y, otherwise say N.\n" "\n" "As a side note, saying Y here will automatically boost HZ to 1000\n" "so that the timer has a chance to clear the overflow counter. On\n" "slower systems (such as the SH-2 and SH-3) this will likely yield\n" "some performance issues. As such, the WDT should be avoided here\n" "unless it is absolutely necessary.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called shwdt.\n" msgstr "" #: drivers/char/watchdog/Kconfig:396 msgid "CP1XXX Hardware Watchdog support" msgstr "" #: drivers/char/watchdog/Kconfig:398 msgid "" "This is the driver for the hardware watchdog timers present on\n" "Sun Microsystems CompactPCI models CP1400 and CP1500.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called cpwatchdog.\n" "\n" "If you do not have a CompactPCI model CP1400 or CP1500, or\n" "another UltraSPARC-IIi-cEngine boardset with hardware watchdog,\n" "you should say N to this option.\n" msgstr "" #: drivers/char/watchdog/Kconfig:410 msgid "RIO Hardware Watchdog support" msgstr "" #: drivers/char/watchdog/Kconfig:412 msgid "" "Say Y here to support the hardware watchdog capability on Sun RIO\n" "machines. The watchdog timeout period is normally one minute but\n" "can be changed with a boot-time parameter.\n" msgstr "" #: drivers/char/watchdog/Kconfig:421 msgid "ISA-based Watchdog Cards" msgstr "" #: drivers/char/watchdog/Kconfig:425 msgid "Berkshire Products ISA-PC Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:427 #, fuzzy msgid "" "This is the driver for the Berkshire Products ISA-PC Watchdog card.\n" "This card simply watches your kernel to make sure it doesn't freeze,\n" "and if it does, it reboots your computer after a certain amount of\n" "time. This driver is like the WDT501 driver but for different\n" "hardware. Please read . The " "PC\n" "watchdog cards can be ordered from .\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called pcwd.\n" "\n" "Most people will say N.\n" msgstr "" "Этот драйвер обслуживает карту Berkshire Products PC Watchdog. Эта\n" "карта котролирует работу ядра и если ядро зависает, то через\n" "определенный интервал времени компьютер перезагружается. Этот драйвер\n" "поход на драйвер WDT501 но для другого оборудования. Эту карту Вы\n" "можете заказать по адресу:http://www.berkprod.com. Некоторые примеры\n" "rc.local файлов Вы можете найти на ftp.bitgate.com.\n" #: drivers/char/watchdog/Kconfig:441 msgid "Mixcom Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:443 msgid "" "This is a driver for the Mixcom hardware watchdog cards. This\n" "watchdog simply watches your kernel to make sure it doesn't freeze,\n" "and if it does, it reboots your computer after a certain amount of\n" "time.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called mixcomwd.\n" "\n" "Most people will say N.\n" msgstr "" #: drivers/char/watchdog/Kconfig:455 msgid "WDT Watchdog timer" msgstr "" #: drivers/char/watchdog/Kconfig:457 #, fuzzy msgid "" "If you have a WDT500P or WDT501P watchdog board, say Y here,\n" "otherwise N. It is not possible to probe for this board, which means\n" "that you have to inform the kernel about the IO port and IRQ that\n" "is needed (you can do this via the io and irq parameters)\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called wdt.\n" msgstr "" "Если Вы имеете платы WDT500P или WDT501P, ответьте Y. Ядро не\n" "может автоматически определить данное устройство, то есть Вы\n" "должны ввести IRQ и адрес ввода/вывода в файле drivers/char/wdt.c.\n" "Этот драйвер может быть модульным (код, который может быть\n" "по вашему желанию добавлен к уже работающему ядру или удален).\n" "Если Вы собираетесь использовать драйвер в модульном режиме\n" "ответьте M и почитайте документацию по модульным драйверам в \n" "файле Documentation/modules.txt.\n" #: drivers/char/watchdog/Kconfig:467 msgid "WDT501 features" msgstr "" #: drivers/char/watchdog/Kconfig:469 #, fuzzy msgid "" "Saying Y here and creating a character special file /dev/temperature\n" "with major number 10 and minor number 131 (\"man mknod\") will give\n" "you a thermometer inside your computer: reading from\n" "/dev/temperature yields one byte, the temperature in degrees\n" "Fahrenheit. This works only if you have a WDT501P watchdog board\n" "installed.\n" "\n" "If you want to enable the Fan Tachometer on the WDT501P, then you\n" "can do this via the tachometer parameter. Only do this if you have a\n" "fan tachometer actually set up.\n" msgstr "" "Ответив Y и создав специальное устройство /dev/temperature с помощью\n" "команды mknod с major и minor номерами 10, 131, вы сможете с этого\n" "файла считывать текущую температуру внутри компьютера. Чтение одного\n" "байта из данного файла даст Вам температуру по Фаренгейту. Данную\n" "возможность поддерживает только плата WDT501P.\n" #: drivers/char/watchdog/Kconfig:485 msgid "PCI-based Watchdog Cards" msgstr "" #: drivers/char/watchdog/Kconfig:489 msgid "Berkshire Products PCI-PC Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:491 #, fuzzy msgid "" "This is the driver for the Berkshire Products PCI-PC Watchdog card.\n" "This card simply watches your kernel to make sure it doesn't freeze,\n" "and if it does, it reboots your computer after a certain amount of\n" "time. The card can also monitor the internal temperature of the PC.\n" "More info is available at .\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called pcwd_pci.\n" "\n" "Most people will say N.\n" msgstr "" "Этот драйвер обслуживает карту Berkshire Products PC Watchdog. Эта\n" "карта котролирует работу ядра и если ядро зависает, то через\n" "определенный интервал времени компьютер перезагружается. Этот драйвер\n" "поход на драйвер WDT501 но для другого оборудования. Эту карту Вы\n" "можете заказать по адресу:http://www.berkprod.com. Некоторые примеры\n" "rc.local файлов Вы можете найти на ftp.bitgate.com.\n" #: drivers/char/watchdog/Kconfig:504 msgid "PCI-WDT500/501 Watchdog timer" msgstr "" #: drivers/char/watchdog/Kconfig:506 msgid "" "If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called wdt_pci.\n" msgstr "" #: drivers/char/watchdog/Kconfig:513 msgid "PCI-WDT501 features" msgstr "" #: drivers/char/watchdog/Kconfig:515 #, fuzzy msgid "" "Saying Y here and creating a character special file /dev/temperature\n" "with major number 10 and minor number 131 (\"man mknod\") will give\n" "you a thermometer inside your computer: reading from\n" "/dev/temperature yields one byte, the temperature in degrees\n" "Fahrenheit. This works only if you have a PCI-WDT501 watchdog board\n" "installed.\n" "\n" "If you want to enable the Fan Tachometer on the PCI-WDT501, then you\n" "can do this via the tachometer parameter. Only do this if you have a\n" "fan tachometer actually set up.\n" msgstr "" "Ответив Y и создав специальное устройство /dev/temperature с помощью\n" "команды mknod с major и minor номерами 10, 131, вы сможете с этого\n" "файла считывать текущую температуру внутри компьютера. Чтение одного\n" "байта из данного файла даст Вам температуру по Фаренгейту. Данную\n" "возможность поддерживает только плата WDT501P.\n" #: drivers/char/watchdog/Kconfig:531 msgid "USB-based Watchdog Cards" msgstr "" #: drivers/char/watchdog/Kconfig:535 msgid "Berkshire Products USB-PC Watchdog" msgstr "" #: drivers/char/watchdog/Kconfig:537 #, fuzzy msgid "" "This is the driver for the Berkshire Products USB-PC Watchdog card.\n" "This card simply watches your kernel to make sure it doesn't freeze,\n" "and if it does, it reboots your computer after a certain amount of\n" "time. The card can also monitor the internal temperature of the PC.\n" "More info is available at .\n" "\n" "To compile this driver as a module, choose M here: the\n" "module will be called pcwd_usb.\n" "\n" "Most people will say N.\n" msgstr "" "Этот драйвер обслуживает карту Berkshire Products PC Watchdog. Эта\n" "карта котролирует работу ядра и если ядро зависает, то через\n" "определенный интервал времени компьютер перезагружается. Этот драйвер\n" "поход на драйвер WDT501 но для другого оборудования. Эту карту Вы\n" "можете заказать по адресу:http://www.berkprod.com. Некоторые примеры\n" "rc.local файлов Вы можете найти на ftp.bitgate.com.\n"